🍺 Enhanced Homebrewing Experience with Homebrewers Outpost Low Profile Elbow Bend Keg Coupler D1514 Review

Just what I needed to free up space in my kegerator. The outlet fitting was leaning against the ceiling of my kegerator. Installed and voila, no more gap issues.

DO NOT use the rubber washers included in the package. They WILL LICK OUT. The metal part is excellent, but it is MANDATORY to buy other, better washers. I'm not the only reviewer to point this out.

I recently bought a kegerator and had to wedge it because there was no gap between the plug and the inner cover. It worked better than I expected. I rebuilt my Type D hitch to fit the ball lock fittings and added them to get the fit I needed with no problems.

These things worked but some horrible information leaked on first install. They were connected directly to Micromatic stainless steel keg fittings. I have replaced the supplied gasket with Micromatic gaskets and they are not leaking. But to be honest it will keep me up at night. I'll probably look for another solution.

I have a KegCo D adapter and the beer hose is coming straight out of the connector and had to be bent because it was being pushed against the top of the kegerator. This elbow perfectly matched the threads on the KegCo D-Connector and included the required washer. There is now about an inch of clearance between the top of the connector and the top of the kegerator. And no more kinked beer hoses. For your health!

I have had no problems with these adapters. I also bought a 90 degree adapter that fits my kegerator with no gaping issues. I didn't have a leak. Overall I am very happy with my purchase. On the gas side, my Sanke faucet had a one-way valve/seal and I just left it there and also left the o-ring in the adapter and I had no problems. .

I recently bought a Danby keg cooler and wanted to convert a Sanke coupling to a ball lock. I needed a 90 degree angle so I could set up the sixth barrel after the rebuild. Worked great. Not sure what other reviews are saying about the washing machine but I haven't had any leaks so far. I was careful not to overtighten. I can now snap in ball lock fittings to connect to my serpentine hitch and still have room for larger kegs.