🔌 15U Wall Mount Open Frame Steel Network Equipment Rack, Black, 17.75" Deep, W19'' x D17.75'' x H29.75'' - KENUCO REG-15U Review

Very good price; easily holds our network switch and associated equipment high up on the wall. Seems pretty strong. If you prefer an open rack and want to mount it securely on the wall, this is a good choice. The holes sure are super-precisely drilled, but as long as you can find the studs to attach to you should be fine.

Rack assembled and installed. After being mounted on the wall, it looks very strong and sturdy. This product comes with a large number of 10/32 rack nuts and bolts, as well as regular 10/32 bolts for the opposite mounting option. Concrete beams were included but not needed in my setup. I'm still in the process of installing the gear and running the cable, but so far I'm very happy with the purchase. Will use the product and supplier again.

Rack is strong and durable. The 15U rack is listed with dimensions stating that it is 25.1 inches high. On this basis, I assigned her a basement room. Unfortunately this size was too big. She is actually about 30.5 inches tall. So I had to redo the frame. I'm thrilled with the rest of the shelf though. Revain or the supplier should change the description so others aren't as surprised as I am.

This block will be ribbed when screwed to the wall. In my application there is a wooden beam above it, in which I drilled a few screw holes. Once the top was attached to the beam with a few screws, it was VERY ribbed. I think I could frame an elephant on him. One of the corners of the front support was damaged. I think this was done upon delivery as the inner shipping box was punctured but the Amazon outer box was not. I was able to bend it back into shape with pliers.

The vertical frame was slightly bent at the corners after shipment, but that was easily fixed. I used the included anchor sleeves and went straight into the concrete wall in my basement. The anchors had really weak washers, and one of them had a bit of a mess on the threads from driving it into the hole I had drilled with a hammer. I was able to screw a nut onto it and bend the threads back into shape. Overall I'd say it's good value for money but if you want something solid then look…

Very happy with this stand, especially for the price. The company seems to have listened to the complaints in the reviews as mine was packaged very well and came with a huge amount of mounting hardware. Without the crossbars, the stand felt a bit flimsy on the floor, but when I mounted it on the wall, it was stone. 16 inch screw holes make it easy to assemble this stand. I attached a plywood board to the studs for my other network gear, and I slide the rack through the board into the studs.…

Regal 15u arrived well packaged and in good condition. Upon reassembly, I found that half of the nuts and bolts used to assemble the rack itself were missing, and a couple of the included bolts broke off when tightened. The tool was about $5 for a set of 16 mounting screws, bolts and washers 1/4-20 x 1/2" and I used blue Loctite on it. I used 4x Spax 1/4 to attach the rack to wall mount. x 3.5" hex head screws with washers. The mounting points were about 16 inches off center, not exactly, and…

Bought a Kenuco 15U rack. I was a little apprehensive about some of the reviews but everything was perfect. Each part of the rack is packed in plastic packaging and is in perfect condition. The center-to-center spacing of the rack mounting holes is exactly 16 inches as shown. I mounted it directly to the studs behind the drywall using 5/16 x 2" screws with washers (hardware store). Once bolted down, the rack was very solid. Of course, sitting on the floor, it wasn't that durable. (Remember…