🚿 Enhance Your Shower Experience with the Kingston Brass K136K2 Designer Trimscape Victorian High Low Shower Kit in Polished Brass Review

correct estimate, 2.5 PGM, water was evenly distributed. It focuses on the bottom half, leaving a barely noticeable rain on the top half. No, I would not recommend it to my friends. I returned it myself.

I would have rated it higher if it wasn't for the fact that both pivots weren't assembled properly when installed and water was splashing everywhere. I mean about 10 feet across the room. After I disassembled and reassembled it, the flow was weak. I drilled a 1/8" hole on the head swivel to 3/16" and the flow was acceptable. I'm considering switching to 1/4".

I really like the shower head but the handle is not very good. You need a wrench to tighten it just enough so it doesn't drip so it can never be adjusted. I've been using it for a few months now and I like the feel of the water coming out of the shower head. it looks like a downpour. so I would recommend, but if you need it to be adjustable I wouldn't recommend it. I also wish the arm was a lot longer.

I bought this to replace an old/leaky rain shower head. I exchanged them after 1 week. I just couldn't take it, the outlet pressure was terrible (and yes we have good water pressure). If you're the kind of person that needs a rain shower head with good pressure, look elsewhere, don't waste your money. I want to keep the packaging as I would be returning it. I ended up buying a Thunderhead TH2.5 and it works great.

I'm happy with it. The water pressure isn't great, but I don't think it should be with a shower head like this. I bought a connector so I can also connect a hand shower for some extra water pressure and so I can wash my dogs in the shower. The wing nuts don't tighten very well and the shower head fell off a couple of times, hitting my head once. I ended up buying a small pair of soft-tipped pliers to have handy so I could tighten the shower head to different heights without ruining the finish…

very good shower head for the price but had a problem with the lever leaking not at the pivot points or o rings but at places where the pipes connect are from the lever section to the pivot section found the hole in the pivot section was not circular and was leaking around the lever tube, contacted kingston brass and they responded very quickly to email them the amazon purchase confirmation and they had it done well but i was downstairs and out and needed a shower straight away so i used JB…

As many others have written this product is of poor quality and leaks at every connector on the extension. When I removed the extension and just installed the shower head the pressure was terrible. I had solid brass fixings and this one doesn't come close. The face of the head is so thin I'm guessing it won't even last a year. There was no way to fix the problems and it's obvious that this company does little to ensure quality. I have canceled an order for another one of these in polished…

Must be one of the horribly cheap and poorly designed bitches I've ever bought. The metal rod was bent when shipped, the unit flows like crazy when plugged in, and the connecting rod can't move from side to side, so you have to adjust the bolt in the wall to tighten it. Buying this junk is one of the reasons I hate ordering things I don't see before buying. Do yourself a favor and DO NOT order this item without seeing it somewhere and making sure it fits your needs. I'm going to go to Home…

This is a great addition to an old shower. Using a can of paint I was able to remodel an old 1950's first aid kit and other obsolete bathroom items. I also painted the shower head to which it is attached to match. There are no plastic parts and when properly adjusted there is no leakage. The pressure is pleasant and even. If you want a shower head that pops out like shards of steel, then this shower head isn't for you. For goodness sake, that's a RAIN SHOWER, not a "cat in the middle of a…