Enhance your Harley Experience with KIWI MASTER Adjustable Air Deflectors for 2014-2021 Harley Touring Electra/Street/Tri Glide CVO - Dark Smoke Review

Windshields work as they should, no problems installing, all holes match. Just make sure you leave the screws loose when you install them until you get them all working. The only thing I would ask for is the black hardware but it doesn't bother and they work great so I gave that 5 stars anyway.

Good for starters First thing I see is a nice scratch. Mold? The bad spot is on the left and right deflector in the same place, the edge of the deflector is smooth and polished on all sides except for these spots, no idea what caused it or why. The end result is very disappointing and once again will have to look for better.

Solid product. However, there is no indication of what screw size or thread count to get. I don't mind if it doesn't come with the hardware, but at least tell me what length I should get, metric or standard! I'm sure if it came with the hardware maybe some information on these things would be great. To be honest you can buy cheaper ones that come with the hardware, it's still the same piece of stamped plastic.

Pros: Win Bottom Baffles look nice and arrived quickly. And they have the right price. The Bad: As you can see from the two photos attached, they forgot the conical collar on them and didn't provide anything to properly mount the screws. Even something like rubber washers would make them viable. They cannot be used without damaging the screws that hold them or the deflectors themselves.

Had to be sent back. The quality is average, but didn't fit. I would have to drill or slot them to fit them. The hardware is definitely junk and the multithreading is bad. Although the screws are short, they look like a deformed billiard cue when you turn them. I found another set here at Revain that was much cheaper but the quality was much better and so was the hardware. It even came with washers which this brand doesn't have. I would not recommend this product but you can judge for yourself.

Bought these to replace a genuine Harley part on my 2018 FLHTK as one was damaged by road debris. Arrived quickly and in excellent packaging. It looks 100% as advertised and fits 99.5% perfectly. The 2 (3 total) outer bolts were slightly offset and required little extra force to get them into the original factory sockets. I will say that the resistance (the force required to adjust the bleed) is noticeably less. But after running 400 miles yesterday and adjusting the vents at highway speeds…

They are a lot cheaper than OEM for a very simple reason, they don't fit at all. Very difficult to assemble as the holes don't line up properly. The installation requires a lot of finesse. At one point I was wondering if I would remove the interior hardware that the screws go into because the holes are so misaligned. If you buy them make sure you have a small round file to move the hole to where it needs to be. Not recommended at all. Find a higher quality item that really fits. If you are…

Yes, it's cheaper and less expensive than the HD version, but as you can imagine it's also cheaper and of lower quality. They were packed very well. Removable plastic sheeting on the "front" of the deflectors, each wrapped in a foam bag, with the fasteners neatly stowed in a small zip-top bag. Worst of all now, both sides have sharp, excessive burrs on the edges that needed to be cut/sanded, as well as excessive burrs on the "stops" that limit how far you can close the deflectors. Then there…