🖥️ Lian Li O11DMINI-1X-3 Vertical GPU Bracket Kit, PCIe 3.0, Black Review

This item is probably perfect for smaller GPUs, but the EVGA 3080 Ti FTW is too big for it. I can get the matching card but that was a pain. First, the riser posts are very difficult to move, but there are three sets of pre-drilled holes - you'll need a tiny head or wrench. The FTW is also tall so it pinches the 120mm exhaust fan too much causing it not to rotate. So your only real option is to attach it to the back of the mount, which looks like quite a bit of fun. Ultimately, if you're…

I ordered a vertical mount knowing I would be using water to cool the computer, so I bought it before I originally had a plan for my loop and still that Standard air cooler from AMD. If you have a standard/large air cooler, vertical mounting won't work as the GPU hits the air cooler. No big deal as I knew what I would eventually do. What I didn't take into account is that since I used the EKWB front spreader plate I had to drill through the bottom of the vertical bracket on either side of the…

I ordered a vertical bracket because I knew I would use water to cool my PC, so I bought it before I originally had a plan for my hinge and still had the stock AMD air cooler. If you have a standard/large air cooler, vertical mounting won't work as the GPU hits the air cooler. No big deal as I knew what I would eventually do. What I didn't take into account is that since I was using an EKWB front distributor plate I had to drill through the bottom of the vertical bracket on either side of the…

I was pleased to find that the 4.0 extension cable worked as it should. I'm disappointed that I can't install a 120 fan in the back anymore. Pleased with the ability to adjust the position of the bracket. You can also adjust the position of the stand on the arm, three positions to get you closer to the glass or your mobile device. In my case with the huge trio MSI Gaming X 6800xt, it still fits snugly. The two tiny screws holding the stand to the bracket barely hold my large map in place…

If you're buying this and planning to install a 360 dual heatsink, you're screwed. To fit a Dual 360 into the Lian Li 011 Mini you need to move the motherboard brackets down through a series of bottom pre-drilled holes for your standoffs used to mount ITX or Mini-ATX motherboards to allow the 360 Heatsink fits on top. Here's the problem I'm having: With this bracket you can't lower an ITX motherboard and install an ITX sized motherboard, connect a vertically mounted graphics card and attach the