💡 LightingWill 10pcs Pack Strip to Strip Unwired Gapless Solderless Snap Down 2Pin Conductor LED Strip Connector for 8mm Wide 3528 2835 Single Color Flex LED Strips: Enhanced Connectivity Solution for 8mm LED Strips Review

Bought to fix a glowing strip that started flickering at the junction after several years of excellent work. They fit perfectly and a few minutes after starting I replaced the plug. Exactly what was needed.

They work great My bulbs had a few issues with the light bar coming out of the socket but they work great. Carefully use a knife or flathead screwdriver to insert the tape on the light side into the connector This is a genuine review 03/13/2019 Cw

These "connectors" did the job and allowed me to install multiple rows of LED strips under the counter, but the wiring is very poor resulting in a fragile connection. Another piece of cheap Chinese junk.

Very tight on light bands. I used 20 gauge red/black stranded wire. I highly recommend connecting the wires together when installing. The clips easily lost their metal teeth when you opened them. Next time I'll look into a screw tightening system for clamps. I had to disconnect and reconnect some of these connections multiple times to finally get them to work.

We used them to connect 2 sections of Minger strip lights (B07JQPVKPC) in our closet. Works great, especially if you're careful to connect positive to positive and negative to negative. Hahaha, luckily we found out quickly and didn't hurt her. One thing to note, don't forget to leave the adhesive paper backing and cut it carefully so you can tear off the part that isn't in the clip. By leaving the paper on the bottom you ensure better contact and don't struggle with the glue to place the strip…

It's a nice, small, unobtrusive size that fills in the tight spots I've installed the LED strips well. Overall 5 stars for functionality and size. They're a little tricky to open, you might find that a small screwdriver helps pry the cover (carefully!). Big warning: Make sure the LED strip is inserted correctly. If there is adhesive on the back of your LED strip, either (1) leave the paper backing in place before connecting, or (2) remove the adhesive from the end leading to the connector, or…

These are great LED strip connectors but very finicky to make a good connection between the strip contact points and/or wires to create long connection paths. I use them to connect multiple light strips for under cabinet lighting and I have three suggestions: 1) Practice connecting them before installing them; 2) solder them for a guaranteed connection; and 3) connect all lights before beginning installation on any surface. I've used speaker wire to make my long runs and it worked great once I…

I was very frustrated with this at first as cutting the light strip on the line they tell you is rounder between sets Gold wire makes these connectors flicker and lose connection. I use them around my pool and using corded connectors is not an option although they work better but who wants cords hanging around their pool. SECRET: After having to install more sets of bulbs and dealing with the flashing lights already installed, I concluded that I would have a better connection if I cut before…