Description of LLAZZ Conditioner Flushing Canister Interface
Super Good Quality AC Flush Kit: This flush canister is made of quality stainless steel, sturdy and anti-corrosion, the capacity is 1000 ML.High-strength PVC airtight hose, the length is 3.5 FT, anti-corrosion, low fluid resistance and high bearing pressure, the fittings will touch the flush solvent, all-metal material ensure the AC flushing kit can be reused. Widely Used: When you need to replace or retrofit AC system, or clean the air conditioning pipes, you can use this flush kit to deep flush each component individually including hose, condenser and evaporator. Do not flush the compressor, expansion valve, orifice tube, filter drier and accumulator. This flush canister set also can be used to clean fuel pipe, and any other washable line such as household refrigerator and air conditioner. How Works : The air conditioning flush can use shop air to pressurize and spray specific AC flush solvent to flush old oil, refrigerant contaminants,resid and dirt. The rubber tapered tip can be sealed against pipe opening and prevent backspray of solution. If the pipe opening is smaller than the rubber tapered tip, you can try to take the tapered tip off and insert the brass spray nozzle into the pipe. It will always work well. The Steps: Firstly, you need recover the old refrigerant, disassemble AC system components, fill the flush canister with lightweight solution, assemble flush kit components and tighten, assemble AC system component, vacuum leak check. There is a detailed instructions pasted on the bottle. Pay attention to pressure gauge index when using, please do not exceed 170PSI. Build in adjustable relief valve, if exceed , it will automatically pressure relief. Contents: Flushing Canister, 3.5 FT hose with flush nozzle and some spare fittings. If you encounter any problems, please feel free to contact us by email.
