Header banner
Revain logoHome Page
m.2 (ngff) ssd to sata iii adapter in 2.5" case aluminum, m.2 ssd drive box with sata 3 ks-is output logo

M.2 (NGFF) SSD to SATA III adapter in 2.5" case aluminum, M.2 SSD drive box with SATA 3 KS-is output Review

5

·

Average

Revainrating 3 out of 5  
Rating 
3.2
Computers, 🖥 Computer Accessories & Peripherals, 💽 Hard Drive Accessories

View on AmazonView on ЯM

Media

(5)
img 1 attached to M.2 (NGFF) SSD to SATA III adapter in 2.5" case aluminum, M.2 SSD drive box with SATA 3 KS-is output
img 2 attached to M.2 (NGFF) SSD to SATA III adapter in 2.5" case aluminum, M.2 SSD drive box with SATA 3 KS-is output
img 3 attached to M.2 (NGFF) SSD to SATA III adapter in 2.5" case aluminum, M.2 SSD drive box with SATA 3 KS-is output
img 4 attached to M.2 (NGFF) SSD to SATA III adapter in 2.5" case aluminum, M.2 SSD drive box with SATA 3 KS-is output

Photos by authors

(6)
img 6 attached to M.2 (NGFF) SSD to SATA III adapter in 2.5" case aluminum, M.2 SSD drive box with SATA 3 KS-is output
img 7 attached to M.2 (NGFF) SSD to SATA III adapter in 2.5" case aluminum, M.2 SSD drive box with SATA 3 KS-is output
img 8 attached to M.2 (NGFF) SSD to SATA III adapter in 2.5" case aluminum, M.2 SSD drive box with SATA 3 KS-is output
img 9 attached to M.2 (NGFF) SSD to SATA III adapter in 2.5" case aluminum, M.2 SSD drive box with SATA 3 KS-is output

Description of M.2 (NGFF) SSD to SATA III adapter in 2.5" case aluminum, M.2 SSD drive box with SATA 3 KS-is output

M.2 (NGFF) SSD to SATA III Adapter in 2.5" KS-is (KS-527)P/N: KS-527It has never been easier to turn your M.2 SSD into a standard 2.5" SATA III SSD. The KS-is KS-527 adapter converts an M.2 NGFF (SATA channel) SSD to a standard 2.5" SATA hard drive. The aluminum alloy case provides additional cooling and facilitates installation in a PC system unit. Suitable for converting B&M key SATA based NGFF SSD to SATA 3.0. Support for SATA I / II / III standards (up to 6 Gb / s). Compatible with both laptop and desktop hard drive, Plug and play. Convenient and practical. M.2 (NGFF) SSD to SATA III Adapter in 2.5 inch KS-527 case supports 22*30mm/22*42mm/22*60mm/22*80mm all sizes of M.2 NGFF (SATA) SSD ). Input: 1 x NGFF B&M Key SATA Female (SATA Chanel); Output: 1 x 2.5" SATA 7 + 15 pin male. The KS-527 is a two-piece housing that blocks and fixes the disc inserted inside.1. Carefully insert the M.2 drive into the case and connect to the M.2.2 adapter. After fixing, connect the 2 parts of the body.3. Fix the case with screws.4. Are you ready to go Please note: It does not support M2 NGFF-PCI-E drives. Please make sure your M.2 SSD is a SATA drive before purchasing. The kit does not include an SSD drive. Characteristics. SpecificationEnclosure provides extra protection for your SSDGet the best performanceEasily convert your M.2 NGFF SSD to a standard 2.5" SATA III 6Gb/s SSDCompatible with M.2 NGFF SATA SSD and SATA-enabled host devices such as desktops and laptops and Hot Swap 2.5 in SATA bays Supports M.2 form factors: 22x30, 22x42, 22x60, 22x80 SSD support SATA NGFF M.2 B-key, B+M-keyStandard 22-pin SATA connector. Case color BlackWeight with packaging, g 69Weight without packaging, g 59Dimensions with packaging, cm 14 x 9 x 1.5Dimensions without packaging, cm 10 x 7 x 0.6

Reviews

Global ratings 5
  • 5
    1
  • 4
    1
  • 3
    1
  • 2
    2
  • 1
    0

Type of review

Revainrating 2 out of 5

The product is unreliable, it is not worth buying.

After soldering the problem area, the adapter worked, but in case of a more serious problem or if there is no opportunity / desire to mess around with a similar defect, it will be money down the drain. I recommend buying the adapter separately and the case separately, and not together like here. The quality of the photo and the light, unfortunately, do not allow you to see the gap on the contacts, I did not find a better angle.

Pros
  • - Works. after fixing. -The case is metal, if you wish, you can put thermal pads on the m2 drive, but it makes little sense, SATA almost does not heat up anyway.
Cons
  • -Repacking from K-sis, inside under the cover there can be anything, in my case it is an adapter from ZOMY, its real price is 250r; -Where these boards are assembled, there is not even a visual quality control. Came from the box with a knocked down and not soldered ceramic capacitor, initially there was no contact; -The board is all in traces of flux.

Revainrating 5 out of 5

Efficient tool for computer storage.

This adapter makes adding extra storage to computers very easy. It is simple to install and immediately recognized by the system. The all-aluminum case and SATA III output ensures fast and reliable data transfer. The only downside is that it requires manual screwing which could be time-consuming. Overall, this product is a great value for the price and a must-have accessory for anyone looking to boost their computer's storage capacity.

Pros
  • Compact design that allows for easy installation and use.
Cons
  • May require additional SATA cables for proper installation depending on the system.

Revainrating 4 out of 5

Reliable product for all occasions, quality on par.

Everything would be fine with this adapter, but at first I did not understand how to carefully disassemble it. As a result, I slightly wrinkled and scratched the cover with a screwdriver to get it off. And when I inserted a 2280 SSD, fastened it with bolts in the kit and began to assemble the case back, it seems that the manufacturer forgot to take into account the dimensions of the bolts in addition to the dimensions of the solid state drive, because. the cover at the place of the bolt began…

Pros
  • Price, metal case for better heat dissipation of the SSD drive
Cons
  • It is not convenient to disassemble, the case with a 2280 SSD is assembled tightly and clumsily

Revainrating 2 out of 5

Product is disappointing, not what it promises.

Rubbish purchase, unfortunately. Apparently, it is for some old disks. For those who have the key of connector B. That is, it will not work under NVMe - the disk is visible in the system, but nothing can be done with it. First I put a stake on the container, then changed it to 2 stars - after all, I didn’t finish watching it. And the seller could, given the number of negative reviews, misconceptions and misunderstandings, add to the description about the key, about NVMe, about old disks. Add…

Pros
  • Boxing for m2
Cons
  • Boxing for some very old m2. Well, key B.

Revainrating 3 out of 5

I should have looked for better, I spent my money on a mediocre product.

The real device does not match the pictures in the description. Instead of a base and a cover, there is a bottom, a drive chassis and a cover. The chassis, together with the disk mounting screw, does not fit into the box (he bent the wall with pliers) and does not allow the lid to be closed (the lid had to be undermined). After such refinement, everything was assembled and earned.

Pros
  • Working
Cons
  • Doesn't match description