Enhance Your Home Décor with Maxxima 10 Pack 1 Gang Decorative Outlet Screwless Wall Plate in White - Standard Size (Pack of 10) Review

The frame that holds the lid in place is very weak and I broke a couple during installation. Due to its fragility, the subframe flexes and in some places there is a gap from the wall to the lid. Not recommended unless you have a perfectly straight wall, which usually doesn't exist.

They're not white like all the other nameplates, switches and outlets I've bought either here or at local big department stores. They will not fit into standard white switches or outlets. They have a distinct gray tint that is very noticeable when installed. Otherwise they are of good quality and fit well.

The white color matches more Decora switch and socket types than other brand wall plates I've tried. This can of course change with age. No unsightly visible seams on the side like Lutron screwless wall panels. Occasional small scratches and dents but less common/noticeable than other screwless wall panels.

Bottom cover too thick and screws too long, switches/sockets sucked out from under cover. Just bought and tested, the bottom cover is just too thick and the screws are too long. The switches/sockets are recessed under the cover. I have an Eaton PJS26W and it works great. However, the price of Eaton 1 speed at Revain is quite high and you need to search other online stores for a better deal.

Well I agree with the other reviewer that it's good value but not worth the saving. They are difficult to align, but really the biggest problem for me is the "not so white" white. They look cheap and when paired with any of the switches from Leviton, Eaton etc (we have toggle switches they should be used with) they look downright cheap with a bluish white colour. This defeats the purpose of "hidden screws". and the difference in quality is immediately apparent. It's a shame, but they're back.

The color of this wall plate is not very consistent which makes me doubt the quality of the plastic. The lid is still pretty tight, although I had to do my best to pull and bend it to dislodge it, but the lid doesn't break. And it completely covers the base plate. What I don't like about this product is that it's too thick. Most of my switches and outlets are recessed into the wall with this cover. (not even). I know I can adjust the switch and outlet but it will take too long.

I am very disappointed in these switches. I used Eaton's screwless wall plates and then saw that they were a lot cheaper. now i know why First, they don't fit many styles of Decora switches. Many of my switches did not fit flush with the panel. The plates do not match Smart Switches at all. Where the latches are, the plate will not latch if the Smart Switch is surrounded by a metal heatsink or if the switch flange is slightly wider. The Eaton disks worked well. Also, as others have said, if you