Blue LED Side Mirror Puddle Light Lamp Assembly | Dodge Ram 1500 2500 3500 4500 5500 (2010-2018), 24SMD Review

Installed on my 2017 Dodge Ram 2500, unplug the old light and plug in the new light, make sure it doesn't go out when you plug it in, the lights are really bright, Very beautiful.

Needed some modifications (90 degree pin bend) to fit my 2011 Ram 3500 Laramie. They're still not as tight as the stock headlights, but they don't fall out and are a lot brighter.

The replacement headlights were easy to assemble. I watched a short video and was able to remove and replace the old headlights on both in about ten minutes. The stock headlights are noticeably brighter compared to the OEM headlights, which I like.

Shines bright, looks good and works well. The only problem I had was having to cut some of the black plastic to make it fit. I also recommend soldering the car harness wires to the connection points on the light as there is not enough space in the mirrors for the end connectors.

Not bad for the money. I have 15 frames 2500 trailer mirrors. I removed my old one from the driver's side and it was a struggle to get it in. She's created some seating, but there's still an edge in front where she didn't quite sit. The tabs on the passenger side weren't long enough, I had to push them down and they flexed a bit. It also didn't fit properly and didn't have a flush hem. Let's see how long they last.

This product is not suitable for mirror hinges. It crossed the wiring and the turning point in the mirror. I ordered this product at a price (not the cheapest and not the most expensive) hoping I wouldn't have any problems. I also chose it because of the "OEM" designation. The back of this item differs significantly from the "true OEM" light which is built to avoid a pivot point.

Pros: Look good, all circuitry is sealed with clear silicone. Once installed, they are very bright. Cons: With passenger lights, the connector lugs need to be bent due to the direction they face in the mirror housing, not the OEM design, and they fit snugly into the internal structure and wire bundle. Not flush mounted to the fronts leaving a noticeable lip, I don't think water can get in. The back sits flat.

There are many videos on the Internet that will help with installation. The only thing to remember is to be careful with the towing mirror part (thin). I broke the driver's side when pulling it out because I pushed too hard in one place. Be gentle and take your time. As for the fit - it's pretty tight. Make sure you have the correct side on each mirror. Once installed it sits a bit proud but I was able to use a soft hammer with a cloth and it sits well. I really can't believe how bright they…

Great pros and cons of this product. The first and most noticeable is the negative. Two electrical connectors are located directly where the mirror wiring harness is located. This means you need to bend the connectors on the lights as much as possible without breaking them in order to install these lights. I'm not sure they will stay in place long as it took numerous tries and pressure to get the light to click into place the way it did. So the lights are BRIGHT. I really like the amount of…