Motivx Tools Filter Wrench Jaguar Review

I am very satisfied with this tool. Bought for oil change in Jag and Range Rover 5.0 V8. It fits very well, and is very easy to handle and finish. I can recommend it and would buy it again in a heartbeat. When my wife gets mad at me, I spend time with this tool and I feel better. It's just fine.

This key is too thick for my Range Rover Sport and does not work as described. Edit: This key fits the Range Rover Sport. However, you must slide the plastic housing to the side to place the wrench on and remove the filter housing cover. It's not a smooth process, but it will work. The instrument itself is very well made.

Unfortunately, this wrench is very expensive compared to others. Although it is definitely necessary. I bought a universal oil filter wrench from AutoZone, it didn't fit. I bought a 15 flat x 90mm wrench in Napa and it didn't fit either. I finally gave up and bought this one. It's much heavier and worked right away. I was ready and maybe a minute or two. You get what you pay for.

I bought a 90mm 15 flutes from an auto parts store and it had short sides. The oil filter cap on my Land Rover would not move. I ended up taking the flutes off, literally thinking I had to pick out the cap. I bought this 15 flute 90mm flute from Motivx and it has deeper strings. There's also a spot where you can use a larger wrench at the top. I immediately unscrewed the filter cover. This is definitely the tool you need if you have a cartridge style oil filter.

If you are doing your own oil change on the L322 Range Rover with 5.0 Jag engine - this tool is a must! For some reason, even with lube on all the O-rings and threads, the oil filter cap still turns so tight that you can't reach it with your hand - it almost feels like you're cutting it in a cross! Either way, this tool fits perfectly and doesn't feel like it will ever bend/snap into the socket or fall off, making changing the oil filter a breeze. You will also need an oil vacuum pump as these…

First off, it's a fairly well-made aluminum alloy. The surface finish is super, perfectly matches the corrugated oil filter. I used this to remove my Jaguar XJ's oil filter and it did the job. Hand tightened to 25Nm it popped under load, not sure if it was a torque surge from my over torque or just a weak spot but on a cold day it popped right in the middle. They quickly sent a replacement and this did a great job with the loosening/retightening procedure which I followed to ensure everything…