🔊 Soundbar Bracket TV Mount | Designed for TVs with Protruded Bottom on Back | Up to 22 lbs | Detachable Long & Short Extension Plates | Mounting Dream MD5421 Review

Used to connect a Yamaha Soundbar to a Roku TCL TV with a QualGear mount [https://smile.amazon.com/g/B00KMXW0IK/] to mount. Since the TV included a swivel mount that I can tilt, I wanted the soundbar to move with the TV and that was a good decision. I'm not keen on the keyhole mounting method, but it's more the soundbar manufacturer's fault for using it.

Nothing included to allow keyhole mounting on the back of most soundbars. Despite the many hardware options included, none of them could do what I needed and I ended up heading to the hardware store. It said it does the job fine after I just did it. Pretty good overall considering they're trying to make it work for all TV models.

The metal is strong enough and there are several provisions for this. It took me a bit of time to get the geometry right so that all TV connections, cables, risers and screws were in place. I'm happy with it and with my TV stand. I needed some adjustments to please all viewers. I recommend it, but it won't solve all problems there. I would buy it again for a second TV.

This item fits perfectly with my TV and is perfect for it. The offset tabs allowed my Vizio soundbar to sit almost perfectly flush with the front of the LG OLED TV. Just had to find the right combination of screws and washers to attach the soundbar to the brackets. The hardware that comes with this mount is more than enough. Comes with almost any combination to match your gear. I believe it even came with screws/bolts for the back of the TV.

I am very happy with this mount. I've used it a little differently than it was designed just for my setup, but the product has enough options that you can mix and match to make it work for you. My soundbar (unfortunately) had keyhole holes (I think screws are much better) but this product has keyhole screws so it worked great. I also went with the offset spacing model, not because my TV had a bulge at the bottom, but because I wanted to mount the soundbar flush with the front of the TV. Highly…

I used these brackets to mount a TCL soundbar to my 55" LG TV. The TV can also be mounted on the wall with the Dream swivel bracket. These two mounts together give me a great looking soundbar and TV together. I bought deep brackets because my TV has a thicker back. But my bottom mounting holes on the TV were too low for the bracket to mount flush to the back of the TV. However, I managed to get it to work and it turned out that the front of the soundbar was flush with the front of the TV…

My particular setup took a bit of fiddling (see below), but it works. My biggest problem was with my soundbar, namely the hardware designed to mount the slotted soundbar didn't hold my particular soundbar. But finding all the hardware for both mounts allowed me to succeed and assemble. See photos. MD2380 Dream TV Wall Mount Mount Installation for Most 26" - 55" LED, LCD, OLED and Plasma Flat Screen TVs, Dual Arm Swivel, Up to VESA 400 x 400mm and 99lbs with Tilting Soundbar, Sound TaoTronics…

My particular setup (shown below) took a bit of fiddling, but it works. My biggest problem was with my soundbar, namely the hardware designed to mount the slotted soundbar didn't hold my particular soundbar. But finding all the hardware for both mounts allowed me to succeed and assemble. See photos. Mounting Dream TV Wall Mount MD2380 for Most 26" - 55" LED, LCD, OLED and Plasma Flat Screen TVs, Dual Arm Swivel, Up to VESA 400 x 400mm and 99lbs with Tilted Soundbar, Sound-TaoTronics panel…

It took some effort to get it working but overall I gave it 5 stars because of some issues I had. The instructions prompt users to remove the TV from all brackets in order to install them. I'm recovering from knee surgery and have a hard drive problem so I couldn't remove the TV from the wall but installed it with the TV connected. I had to be flexible in my approach and it worked because of the flexibility of the product. I rate it high because they gave me everything I needed including…

Mounting The Dream MD5421 has more adjustment options and is cheaper than the similar MD4520 so I bought the MD5421 to mount the soundbar above my TV. I first screwed the long and short extension plates together (because the mounting holes on the back of the soundbar are far apart), then screwed the extension plates to each bracket. It's kind of a big Y pattern. I also changed the order of the protruding standoffs to correctly set the depth of the soundbar relative to the front of the TV. You…