🔧 NEIKO 00236A 3/4” Drive Impact Extension Bars Set, 3-Piece, Sizes 4”, 6”, 10”, Made of Cr-Mo Steel Review

Hard to beat for the price. The only problem I have is the length of the extensions. The length they have on the extension is the overall length, not the working length. Working length one inch shorter. I know this isn't a problem for most applications, but I have to tighten the screws through the access holes. The extensions work for what I need, but it would be better if they were an inch longer. FYI if you are working in a restricted area.

I am a Heavy Duty Diesel Engine Mechanic. I bought them along with a 3/4" breaker to remove rear wheel lugs from the 40 foot passenger buses I work on. I needed a good device to change flat tires on the side of the road during road maintenance. They are very practical and I often use them in the store. I've never used them on a percussion pistol, but they hold up very well to hand removing eyelets that have been tightened to 450-500 ft lbs. Great deal for the price!

If you're a mechanic you know how expensive it can be to find the best deal. Most of us rely on tool carts for the convenience of buying now and paying later. I noticed that many of the tools I buy from the truck are made in Taiwan (SanpOn, Cornwell). To be honest with some of the tools I find on trucks I have found exactly the same thing at Revain for a much lower price. I've been wanting to get a 3/4" extension set for a long time, but you can't get a set like that on a truck at this price.

Used the longest extension along with a 42mm socket and a broken rod to loosen some 42mm nuts on a 7ft rotary mower. Tractor. Before purchasing this Revain extension, base and broken rod I was concerned that I would have to use an impact wrench and an air compressor to remove the nuts. However, with this extension, the socket and the long nuts came off easily! The longest extension provided the clearance I needed to remove the outlets while standing on top of the mower deck. I know the nuts…