Header banner
Revain logoHome Page
onkron g140 monitor mount 13"-32" desktop, 2 x 8 kg, gas lift, steel, black logo

ONKRON G140 monitor mount 13"-32" desktop, 2 x 8 kg, gas lift, steel, black Review

7

·

Average

Revainrating 3 out of 5  
Rating 
3.1
Computers, 🖥 Computer Accessories & Peripherals, 🖥️ Monitor Accessories, 🖥 Computer Accessories & Peripherals

View on AmazonView on ЯM

Media

(8)
img 1 attached to ONKRON G140 monitor mount 13"-32" desktop, 2 x 8 kg, gas lift, steel, black
img 2 attached to ONKRON G140 monitor mount 13"-32" desktop, 2 x 8 kg, gas lift, steel, black
img 3 attached to ONKRON G140 monitor mount 13"-32" desktop, 2 x 8 kg, gas lift, steel, black
img 4 attached to ONKRON G140 monitor mount 13"-32" desktop, 2 x 8 kg, gas lift, steel, black

Photos by authors

(1)
img 9 attached to ONKRON G140 monitor mount 13"-32" desktop, 2 x 8 kg, gas lift, steel, black

Description of ONKRON G140 monitor mount 13"-32" desktop, 2 x 8 kg, gas lift, steel, black

The ONKRON G140 dual monitor desktop arm with gas lift technology is suitable for monitors and TVs with a diagonal of 13 to 32 inches (33.02-81.28 cm) and weighing up to 8 kg each. The mechanism with a return spring and a gas shock absorber, located inside the bracket body, will make it possible to easily move the monitor to any position you need. The manufacturer has provided two ways to mount the bracket. Reliable clamp allows you to mount the bracket on the edge of the table. The kit also comes with a mechanism that allows you to install the bracket through a hole in the tabletop. The ONKRON G140 Dual Monitor Desk Mount helps you optimize your space and free up space for documents and office equipment on your desktop. This stylish holder will be a good solution for your home or office. Benefits: - Wire management system. The cable channel built into the case will allow you to hide and fix the wires for convenience and aesthetic appearance. - Various VESA mounting options. The bracket is universal due to several VESA sizes provided by the manufacturer - 75x75 mm and 100x100 mm. - Removable VESA panel. The special mechanism provided by the bracket design will make the process of installing the screen easier and faster. - Wide tilt options. With an angle of inclination from -35 to +35 degrees, you can adjust the monitor to your individual parameters in the most comfortable way. By placing it in the right position relative to the position at the table, you will maintain the correct posture and good vision. - Large angle of rotation. You can rotate the monitor around its own axis by 180°. This advantage allows you to easily adjust viewing angles and make viewing available from anywhere in the room. Compatibility: Most popular brands of monitors and TVs, including Acer, AOC, Asus, BenQ, Dell, Hitachi, HP, Huawei, Hyundai, JVC, Lenovo, LG, Motorola, MSI, NEC, Nokia, Panasonic, Philips, Razer, Samsung , Sharp, Skyworth, Sony, TCL, Telefunken, Terra, Thomson, Toshiba, ViewSonic, Xiaomi, etc. Complete set: bracket for 2 monitors, a set of keys and fasteners for installing monitors, detailed instructions in Russian.
Hide

Reviews

Global ratings 7
  • 5
    1
  • 4
    3
  • 3
    1
  • 2
    0
  • 1
    2

Type of review

Revainrating 1 out of 5

A terrible purchase, I sympathize with everyone who bought it.

The first time I ordered on yadenks. Market. The store is still a bucket as it turned out (judging by the attitude . they thought that they were ordering from afar, they wouldn’t look, they wouldn’t feel, don’t care, they’re unlikely to return, we’ll send a crippled one), right under the pencil . even, probably, under the arm . I liked the delivery. Status tracked in a timely manner. Delivery on time, the courier called in advance.

Cons
  • The bracket looks like it was already in use (traces on the bracket itself, on the bolts from strong tightening). Lots of bolts with a broken hat that the 2 included wrenches don't fit =__=. The mount to the table has already been assembled, which also speaks of the BU. The bracket itself, not only 32, does not hold my small 24 monitor in a horizontal position, although the nut is also tightened to the maximum there (out of the box, which again speaks of a control unit and probably for this reason it was returned). In general, the quality leaves much to be desired. If today it doesn’t work out so that the bracket holds the monitor normally (I’ll check the assembly again to see if all the bolts and nuts are tightened), then I’ll return it. And yes, it's only 1 monitor! The second one, which I didn’t even try to hang 8 kg, so I don’t even know if it’s worth fooling around .

Revainrating 3 out of 5

Not quite what I wanted, but mostly okay.

As long as everything keeps on it will be seen Its pros: The maximum opportunity was able to fix two 30x70 monitors on them and the ability to transform vertical and horizontal position Its cons: Weak fixing bolts one of the mounts tore off had to buy a bolt with a nut to fix it on a tripod

Revainrating 5 out of 5

A very high-quality product, I take it not for the first time.

Pros below: It is very easy to assemble, but be careful with gas lifts, when you attached the monitor, it accidentally flew off and drove straight into the nose with a gas lift) With its cons: Unfortunately all the same not for two 27 inch monitors. You can see how the mount is bent. It is necessary to install through the table, and not tighten this.

Revainrating 1 out of 5

The worst purchase in my life, dont repeat my mistake

I'm adding a review because the same product is "re-uploaded" and the reviews are reset. When assembling, the collar-like fastening of the arm cracked. The attachment part is made of silumin (which became visible after the breakdown), see photo. Perhaps I overtightened the clamping bolt, but there is no stupor, which could well be arranged in the structure - between the clamped "ears". The bolt was still turning easily, without effort, when the arc snapped. I repeat, to use silumin for such an

Pros
  • Advantages: 1) Easy installation. 2) In addition to the scope of delivery, only one Phillips screwdriver is needed. 3) Low price relative to really high-quality brands (5-8 times cheaper than, for example, Ergotron).
Cons
  • Flaws: 1) Poor quality materials - silumin in the load-bearing structure at break is the finish. 2) The assembly does not look reliable.

Revainrating 4 out of 5

A reliable product for all occasions, the quality is at the level.

Extremely happy with this purchase! Using, adjusting monitors has become much more convenient. This is my first bracket, there is nothing to compare with, but for 7000 I think it’s better not to find it with a 5-year warranty, so, of course, it’s rustic, but it’s good for 4, if you want to save money, you can look at "North Bayou H180" on Ali. The Vesa mount is a little simpler than in the pictures, but oh well. There is much more free space on the table) I am satisfied with the bracket…

Pros
  • Holds 2 monitors securely, one at 25' weighing 5Kg, the second at 34' 7Kg, in two weeks not one of the gas lifts has weakened. The length of the rod is 440mm, I was very worried about what it would be, because in previous revisions, as I deducted, they were ≈360mm, now (10/06/22), everything is probably in order.
Cons
  • The joints of the bracket parts are not reliable, therefore, without proper adjustment, the monitors will hang crookedly, the bar itself on the clamp, no matter how you tighten the clamp with heavy monitors (I have one ≈7.0Kg on the scales), it will still tilt strongly towards the monitor, even if missing the protrusion of the tabletop. The clamp is bulky, I have a protrusion = 40mm, it was not possible to install it all the way, consider it when buying. And on the little things, on the bracket itself on the metal parts there were external defects, which upset me a little.

Revainrating 4 out of 5

Good value for money, I recommend it.

Has some pros: -Good gas lifts - Metal quality is good -There are rubberized connectors Has cons: -Price, the cost should be 4-6t, but definitely not 7-10, for 7-10 you can buy analogues with better quality and backlight

Revainrating 4 out of 5

The product is of good quality, there is only one minor defect.

In general, it's more like 3+ than 4 points. From the advantages of appearance, ease of assembly and strength. If you fix the bracket and do not touch the monitors, then everything is fine, but if there is a need to interact with the monitor or mount, then it’s a real pain: - In the middle segment, without the effort of 2 hands, the position cannot be changed and the screw cannot be loosened. - At the slightest interaction, the screen constantly tilts down, tightening the screw does not help…

Pros
  • Good appearance Ease of assembly, although some items in the instructions would be reversed.
Cons
  • Screen tilts forward / backward and left / right - a continuous headache. Flexion in the middle segment requires the use of force, it is impossible to adjust with one hand.