Graphite Metallic Oracle Lighting Oculus Bi-LED Projector Headlights for Jeep JL / Gladiator JT Review

Installation was easy. Video Quadratec has the best step-by-step guide. Although the person uses the extra wire to run around the fuse box, I only removed part of the plastic/rubber cover to reveal more colored wires. A couple of zip ties to hold the wiring harness in place and you're done.

As with any Wrangler headlamp, the front grille will need to be removed to install, but it's easy if you follow the instructions. The halo rings are a nice upgrade too, I actually hooked them up to an aux switch to be able to turn them off when it's light out. The headlights themselves are sharply dimmed and are a definite improvement over the stock halogen headlights in terms of brightness and spread. Very happy with it!

Installation is easy if you follow the instructions. And the material from which it was built is similar to that of a jeep. My problem was that one of the headlights didn't finish the plastic nut to attach the halo wire on the passenger side. My first disc failed due to lack of protection, so I had to use tape and zip ties to hold it in place and secure it. I don't expect problems like this with something completely new, and the company doesn't ship parts.

These headlights allow me to light up my neighbor's living room from the block (through his curtains when I turn on the high beams. They are designed to be installed by ordinary people) . People, so you don't have to be an auto electrician to get them working. Also, the Jeep Wrangler is built like a Lego set, so working on the Jeep side is just as easy. They are much brighter (=safer) than factory headlights. , but not dangerously blinding oncoming traffic if you line them up correctly. Out of…

These are amazing headlights. Installation took a while but wasn't difficult. I added a (BT1) bluetooth dongle and connected the drls to the 12v cigarette lighter fuse so they turn on when the engine starts. starts, then connect the colors to the battery if you want them to turn on when the engine is off. I wired them so that the demonic eye and outer ring are the same color and the middle ring is a different color, but you can just wire them as is or add more (BT1) for each color ring and them