🛠️ Orion Motor Tech ATV 4x110 Wheel Spacers 2 Inches with 10x1.25 Studs, Compatible with Polaris Kawasaki Yamaha Rhino Grizzly Suzuki, Pack of 4 Review

They can be fitted to a Rhino but you will need longer wheel studs. I was willing to get longer wheel studs, but they don't make longer rhinoceros studs. So I sent them back and got a quick refund!

Will not fit 2007 Yamaha Grizzly 450 4WD. The lug pattern is fine, but the wheel doesn't fit over the tapered center lip. The wheel is 3/8" from the spacer. Delivery was quick and the product was well made

I recently purchased this item. The contribution is 4 pieces. I only received 2 pieces. I reported the non-compliance to Revain and received a refund. I ordered a second time and again only received 2 pieces. The price is good for 4 spacers, not 2.

I've tried installing it on multiple computers and encountered the same problems on all of them. You will need to fit longer studs to your car and the milled edge on the spacer will need to be cut off to fit most rims. Very shiny but that's the only good thing I can say about them.

Very high quality wheel spacers but not compatible with my Yamaha bruin without replacing the wheel bolts on the hubs. The product listing says my rim is compatible, but the lug nuts only grip about 6 turns of the stud (halfway through the lug nut). Very disappointed, really wish they would work.

Bought these spacers for my 1991 TRX300FW. They do not fit. I have four Hondas on the shortlist. They don't match any of them. Also, the eyelet holes on the spacers are so thick that you can only put four threads on the nut. Okay so these are hub centered spacers but the register is 32mm not 74mm as advertised. Pretty good spacers, as said not suitable for all ATVs.

I think I should have checked the pictures better. Installed 2 on a 2016 trx500 rubicon and 2 on a 96 trx300 fourtrax. The lug pattern was perfect and the finish seems good, but there were issues. First, the holes for standard wheel studs aren't deep enough, so wheel nuts don't get a good bite when installing spacers. I made sure to secure everything with a percussion gun. Second, there is a 1/4" lip that prevents the rim from fully seating against the spacers. I used a cut-off wheel to remove…

Gaskets Honestly great quality material wise and I'm happy with the seller but the holes in the gaskets for the nuts aren't big enough to fit in To fit the outlet I tried Handyman, Husky and Stanley and none of them came back up after a hugely disappointing 1/2 hour. I've found cheap unbranded china that was a little thinner and luckily it fit, but why don't they make the diameter a little larger? And also the inside diameter of my stock rim around the hub is the same diameter as the lug on the