Header banner
Revain logoHome Page
⚙️ optimized cr1401g air regulator with steel-protected gauge, 1/4" npt logo

⚙️ Optimized CR1401G Air Regulator with Steel-Protected Gauge, 1/4" NPT Review

4

·

Very good

Revainrating 4.5 out of 5  
Rating 
4.3
🔩 Power Tool Parts & Accessories, 🔧 Power & Hand Tools

View on AmazonView on ЯM

Media

(4)
img 1 attached to ⚙️ Optimized CR1401G Air Regulator with Steel-Protected Gauge, 1/4" NPT
img 2 attached to ⚙️ Optimized CR1401G Air Regulator with Steel-Protected Gauge, 1/4" NPT
img 3 attached to ⚙️ Optimized CR1401G Air Regulator with Steel-Protected Gauge, 1/4" NPT
img 4 attached to ⚙️ Optimized CR1401G Air Regulator with Steel-Protected Gauge, 1/4" NPT

Description of ⚙️ Optimized CR1401G Air Regulator with Steel-Protected Gauge, 1/4" NPT

Air regulator for precisely regulating and maintaining constant air pressure. Accurate downstream air pressure regulation between 1 and 150-psi. High impact composite regulator knob and steel protected gauge. 60-Scfm at 100-PSI with 1/4-inch NPT ports. Comes with a 1-year limited. One directional air flow (right to left) when configured as pictured with knob on top. (Can be configured with knob on bottom for left to right flow. MUST be set up in the correct direction of air flow to work properly. Max inlet pressure 200 PSI. Max output pressure 150 PSI.

Reviews

Global ratings 4
  • 5
    3
  • 4
    0
  • 3
    0
  • 2
    1
  • 1
    0

Type of review

Revainrating 5 out of 5

Works great, doesn't leak.

I noticed the regulator on my portable compressor was leaking so I installed the regulator I salvaged from my old compressor and it was leaking too so I ordered this one. It arrived the next day. It only took a few minutes to install and it works like a champ. Some reviewers have mentioned that the sensor is installed with thread lock. This is the best practice for aluminum fittings. The PTFE tape will over-tighten in this case, which can cause the aluminum to crack. Keep in mind one tip and…

Pros
  • Tools & Housewares
Cons
  • Nothing here

Revainrating 5 out of 5

It's hard to beat the quality of this device considering how much I REALLY paid for it. IMPRESSIVE!

It was very easy for me to install this unit on my 125psi cylinder. The original was one piece. After installing it and making sure all the plumbing was fine, there were NO leaks in the system whatsoever. Lasted 110psi for over a week and is still holding up. I didn't have to use air for over a week, so last week I went to the tire pressure gauge that was attached to the hose and pushed the button three times, using about 5 pounds and the pump each time. updates PSI to 110 PSI every time and…

Pros
  • Air Tool Parts and Accessories
Cons
  • Blank

Revainrating 2 out of 5

Max pressure at 120psi inch fits air compressor accessories

According to the packaging it regulates the pressure from 0 to 200psi. According to the description, it regulates the pressure up to 160 psi. The reality is that the maximum pressure it will reach is 120psi with my compressor at 175psi regardless of whether my compressor tank is at 175 or 130. I even changed the gauge to a known good gauge that is larger and has the same 120psi maximum pressure. If I had known that, I would not have bought it. By the way, the caliber thread was glued. Thought I

Pros
  • Power tool parts and accessories
Cons
  • Good but not very good

Revainrating 5 out of 5

Get what you pay for

This works great with my compressor. It holds pressure as it should and is easy to open and close (I zero the hose when I'm done because there's always a leak in one of the hose connections and I don't like it when it happens at random times useless swirls . ) Hooking it up was easy as I already had the connectors and they fitted just like the original equipment. I would recommend it to anyone who needs to fix them. Update 3 months later: This sucks. Failed. After three months it started…

Pros
  • Air Compressor Accessories
Cons
  • Long Lead Time