20ft Speaker Cable, 9-Conductor, 18AWG Pure OFC, Ultra-Flexible & Easy Peel Jacket, 4-Channel Wire & Remote for Optimal Performance Review

This is a versatile option for building a 4-channel amplifier. Ine thick wire to lay, but the quality of 3n is useless. That made the whole setup easier for me. It's thick, but if you can fit it in the power channels, it will fit. It will stick out if it is directly under the carpet.

This is what you need if you don't want to damage your car's wiring harness. I routed it from the amp to a wiring harness adapter that connects to my stock head unit wiring harness and cut and spliced there so my truck's stock wiring was completely intact. Sounds amazing and very easy, never had to pull door panels!

My truck only had wiring for 2 speakers but room for 2 more behind the seats, no wiring. I wanted to use the same wire colors as the aftermarket head unit to get it right so I got this kit as I couldn't find the colors I needed in the smaller spools. It's quite a thick bunch but I cut the outer sleeve to separate it and only used 2 sets (green and purple) for my runs with no issues.

Used during a recent audio upgrade on a 2021 Chevy Colorado. This MC cable added an amplifier to the back of the club cab and is long enough for this application to run the speaker wiring from the stereo back to the factory wiring harness. Complete speaker wiring harness for 4 speaker system + amplifier turn-on signal. Color conforms to GM specifications for speaker wiring. Good flex cable, insulation/jacket is a bit cumbersome but much easier than separate wiring. Only downside, I would have…

I have two of these harnesses that power all my speakers from 3 different amps. You are really good! Easy to route through the car, forgiving and easy to disconnect cables where you need them. They can handle at least 2000W RMS and probably a lot more. The speakers sound amazing, studio quality, with no clipping or hum. Bluetooth in a truck sounds amazing! I've had many compliments on the sound quality and this harness is key. Many Thanks. Don't hesitate to buy them and properly connect your…

High quality cable - much easier to use to connect an OEM radio cable to a line out converter/signal processor than running individual cables. STANDARD COLOR CODING that makes installation very quick and easy to troubleshoot. Overall, this wire is about 25% more flexible than a 4AWG stranded audio cable, likely due to the individual insulated wires. For reference only if your setup requires you to make tight corners or corners. Buy some wire lugs and heat shrink tubing to give your vehicle a…

Used during a recent audio upgrade on a 2021 Chevy Colorado. This MC cable added an amplifier to the back of the club cab and is long enough for this application to run the speaker wiring from the stereo back to the factory wiring harness. Complete loudspeaker wiring harness for 4-speaker system + amplifier switch-on signal. Color conforms to GM specifications for speaker wiring. Good flex cable, insulation/sheathing is a little cumbersome but much easier than separate wiring. Only downside, I…