Rectorseal 83226 EZ Trap 226 Review

A local air conditioning company tried to charge me over $200 to install this unit, but I was able to install it myself for less than $20.

The wires are too stiff making it difficult to place them where needed! Push him out of the hole. You can use soft flexible.

It's funny how something so small can stop your oven from working. If you have an EZ Trap, this is the first thing to check to see if your oven is shutting down. The solution is simple, but if you don't have it handy, you're in for a fix. Have a replacement ready.

I tested it before installing it by putting water in the tube and connecting my voltmeter to the end of the wires and it worked like a champ. The switch flicked on and off correctly several times without hesitation. After installing and connecting it with the block on, I asked my wife to check if the capacitor block shut off after I lifted the little plunger that is sticking out indicating the float is rising. Capacitor bank shut down as expected. Then I let go of it and the condenser unit…

I really like this float switch. The switch actually has a contact that is not used in a three-pronged plug. This means it can be normally closed and normally opened by simply unplugging and plugging it back in. This was important because I use it in the plumbing chimney to indicate if there is a backup sewer. When the water rises, a float switch trips and hooks up to an alarm circuit (rather than just overflowing the basement bath, which is never used by the sewage above).