Relay Aqara LLKZMK11LM 10 A Review

We took it to control a 100W warm window sill and a 500W Quartz battery, by means of organizing scenarios with reference to a temperature sensor on the loggia through the MiHome application. It was perfect for our purposes.

I order a second one. Both channels L1 and L2 are mixed up, i. E. S1 includes L2 and S2 includes L1. It does not fit into a standard socket, but this is not necessary, because. in the socket there is only a phase, and zero on the ceiling in the chandelier.

I decided to make LED lighting for the countertop and the top of the kitchen cabinets, I wanted to be able to turn on the top and the countertop separately, plus everything could be controlled remotely, I connected it through this relay, plus I additionally purchased a wireless two-gang switch from the same company for the possibility of physical shutdown, it is glued to any place with double-sided tape or simply placed where it is convenient, it runs on a battery which, according to the…

I took it to control the light with a two-gang switch. The case is large, it does not fit into the Schneider socket box with a depth of 45. Without a body with a slight creak climbs. From above, it closes without problems with a Schneider Unika two-gang switch (with backlight). Without finalizing the switch, its backlight will not work. I immediately made friends with the aqara e1 hub in the 2022 region, then ated the firmware and that's it, it just works.

The box was different from the one seen on the Internet, only hieroglyphs on the front, no logo. With a back tag in 2022. Inside the instruction in 2022. But after connecting and installing, the application is displayed as original, ated without problems to the new firmware.

Installed in a ceiling chandelier, the ideal size in the photo seems large, but in fact a little more than a matchbox. Only one channel is active.

I would like more channels with less current to untie through starters. I did the control of the electric boiler through the standard relays in the gap of the standard buttons. I also made the control of the thermal curtain through a contactor with the possibility of cooling.

good relay Its pros: Works great in the RU region. Reaction to commands is faster than Sonoff. Has cons: Like no. I already had 2 relays that have been working for 1 year without a break.

Pairing with the Acar M2 hub is on top, the response of the device pleased, with Alice's voice command it turns on almost instantly without delay.

Insights and thoughts on this item.Worked great on the xiaomi gateway 2. The connection is fast. Quality, small. Alice does not see on this gateway.

Probably the size is acceptable for a two-channel relay. I do not shove it into the socket, and the size does not particularly sadden me. Has some pros: Works well, remembers its state in the event of a power outage Cons below: Hefty, and clicks loudly. When connecting, you must be careful, otherwise all the magical blue smoke may come out of the box, and the relay will stop working.

Built a bunch of projects on this relay. But the price then was 800. I took a review on Zen Icompared two-channel with a single-channel and with a relay without a neutral, and also talk about why they burned. If anyone is interested, I'll take a picture of how tocomnvert it into drycomntact

When controlled, it clicks quite loudly, but this is even good - it is immediately clear that the relay is functioning normally.

I use it to switch lighting, connecting to Station 2 was a pleasant surprise, without creating an Aqara account, within a couple of minutes

Faced such a problem. In my bathroom, 1 wire is connected to the switch (light), while there is an extractor hood connected directly to the wire on the lamp (they didn’t reach the switch). In this scheme, the hood always worked for me when I turned on the light in the restroom. With the help of this relay and a smart button, I was able to make it so that now my light turns on from the switch (or by the motion sensor), and I can turn on the hood separately from the smart button.

One of the two relays turned out to be mechanically damaged, obviously from some kind of blow. Link to a video review of the insides of the relay in the QR code in the photo.

Having tried almost all the elements of a smart home, I think that only relays, sockets and infrared remotes are really needed, the rest is marketing. And this relay is one of the best Pros: The most essential smart home gadget. High currents, two channels, the possibility of asymmetric turning on channels (when one turns on, the second turns off, for all kinds of curtains, gates and hydrolocks). Possibility of control, conventional buttons and switches, for example, existing switches. ZigBee…

With its pros: Two-channel relay, there are certain features in the connection. A large number of marriages on them, but this is the fault of the manufacturer, not the seller Some cons: Lots of marriage. Of the 7 bought in different places at different times, 3 did not work right out of the box

Due to the functionality of measuring electricity, they cannot be used as a dry contact according to the old instructions. You need to open and cut the circuit. It is very convenient to buy them, like any devices of acar, in the Amazon store, lowering cashback on them (who has) Has pros: A bunch of these relays in use. Everything works as expected based on known reviews and experience Different cons: Previously, they lost the hub when it was de-energized. Already half a year should be fixed…

Pros below: A very convenient relay, of course, if you are building a smart home on Aqara. Works reliably, is easily configured, the result pleases Cons: There are no complaints. Find fault only if you hear clicks when switching, at night, out of habit, hear well