High-Quality Mimi Replacement Screen for Black iPad Mini: Touch Screen Digitizer, IC Chip, Home Button, and Flex Cable Assembly Review

The screen is generally good, but there is a dead zone in the touch sensor, resulting in a screen area of approximately 1 x 3 inches that is not available for touch input. receive.

Chip won't attach? I pinned it, then put everything together and couldn't unlock it?! Then he took everything apart again, but the chip didn't stick! The home button now seems to work after reconnecting, but the screen doesn't respond to swiping or opening the camera?

It had a small dead zone when I first tested it, but I didn't want to return it at the time. Since then (2 days later) there has been feedback of its own accord! I would not recommend buying this glass/digitizer. The next time I order, I will choose a more reliable and expensive screen.

Product broke after a few days. This product was properly installed by a qualified technician and appeared to be working properly. After a few days of infrequent use, the screen just went haywire, it's like we're pressing buttons back and forth. It all started with the menu button and then the error expanded to say 70% of the screen. Under this condition, the device cannot be used. Removed the screen and then tested again, same problem.

I change screens a lot but this one is bad. Cons: The packaging is terrible compared to what I usually see. Thin bubble wrap sandwiched between two thin pieces of cardboard. There's no smart coverage sensor, so don't plan on using it. You have to tape all of the exposed metal onto the ribbon cable or it will short out and cause problems (most screens are like that). Pros: It works if you get past the issues and that's the only reason it gets 2 stars because I've been able to get it to work and…

Bought as a replacement screen for a customer. The digitizer cable is already soldered on. YouTube videos suggest using tape from an old screen to cover the connections on the underside of the inside of the digitizer, which I did. After installation, the screen jumped in all directions and was almost unusable. At first I thought it was the placement of the magnets, but found that I had to apply additional tape to fully cover all of the exposed components on the bottom of the digitizer. After I…

Before purchasing we checked YouTube videos to make sure we know how to do it. The local mall wanted to fix this more than we even paid for the iPad. The exchange lasted several hours. This project requires patience and utmost care. We watched the video over and over again to make sure it was perfect. Well we have to say we were really skeptical about buying a replacement screen and our ability to replace it ourselves. but we were pleasantly surprised! Sits perfectly. There are no dead zones…