Header banner
Revain logoHome Page
respiratory protection kit jeta safety j-set 6500 m half mask logo

Respiratory protection kit Jeta Safety J-SET 6500 M half mask Review

15

·

Very good

Revainrating 4.5 out of 5  
Rating 
4.6
Industrial and Scientific, 🔐 Occupational Health & Safety Products, 🧤 Personal Protective Equipment, 🔐 Occupational Health & Safety Products

View on AmazonView on ЯM

Media

(4)
img 1 attached to Respiratory protection kit Jeta Safety J-SET 6500 M half mask
img 2 attached to Respiratory protection kit Jeta Safety J-SET 6500 M half mask
img 3 attached to Respiratory protection kit Jeta Safety J-SET 6500 M half mask
img 4 attached to Respiratory protection kit Jeta Safety J-SET 6500 M half mask

Description of Respiratory protection kit Jeta Safety J-SET 6500 M half mask

The Jeta Pro 6500 half mask has a wide range of applications and is used to protect the respiratory system from gases, dust and aerosols. The complete set of the J-SET6500 half mask allows you to immediately assemble the mask and start working: - Half mask; - Anti-gas carbon filters; - Pre-filters; - Holders; The design of the half mask is completely collapsible, it is easy to clean and disinfect. Filters are attached to the mask using a standard bayonet mount. Applications: - for painting; - car painting; - furniture production; - paint and varnish production; - work with petroleum products; - pesticide treatment; - work with adhesives and epoxy resins; mask features: - the diameter of the exhalation valve is larger; - it is easier to breathe, there are no extraneous sounds when breathing; - breathing resistance is 4 times lower than the state standard; - soft headband (the ability to adjust to the size of the head); - soft obturator; - easily collapsible design; - flexible fastening locks; - interchangeability filters with other manufacturers: 3M, MK, Roxel Pro filters: The Jeta Pro J-SET6500 half mask is equipped with Jeta 6510 class A1 anti-gas carbon filters, which are suitable for a wide range of tasks. Designed to protect against organic vapors and gases with a boiling point above 65C, these include: organic solvents such as 646, petroleum products, ethers, polyesters. If you need stronger protection, or vice versa, you just need to work with dust, then you can purchase separately filters for the task: - Jeta Pro 6541 filter for a mask from organic vapors and acid gases, ammonia and its compounds; - Jeta Pro 6540 filter for a mask from organic vapors and acid gases AE1; - Jeta Pro 6521 anti-aerosol carbon mask filter P3; equipment: JETA PRO 6500 half mask - 1 pc; JETA PRO 6510 filters for protection against organic gases and vapors A1 - 2 pcs; JETA PRO 6020 pre-filter for dust protection and P2 aerosols - 4 pcs; JETA PRO 5101 holder for pre-filters - 2 pcs; JETA PRO mask storage bag - 1 pc; JETA PRO disposable gloves - 1 pair;
Hide

Reviews

Global ratings 15
  • 5
    13
  • 4
    0
  • 3
    1
  • 2
    0
  • 1
    1

Type of review

Revainrating 5 out of 5

The purchase brought only positive emotions.

I am satisfied. Silicone is pleasant, does not stink. Sits on the face tightly. Breathe easy. The cartridges are easy to maintain. On the face does not strain. I recommend. I work with wood and it helps a lot. Take it, you will not regret, I ANSWER.

Revainrating 5 out of 5

The quality exceeds all expectations, I recommend to buy.

I will add a review: I checked it out at work, everything seems to be in working order, and the test with paint and building dust was a huge success! There's a risk of getting claustrophobic in there. Generally speaking, I would advise purchasing.

Pros
  • Excellent mask made of silicone; it conforms exceptionally well to the shape of the wearer's face; the adjustment mechanisms function flawlessly Additionally, the filter pieces have a high level of craftsmanship. Even though I haven't put it through its paces at the office just yet, I have full faith that it will provide excellent respiratory protection.

Revainrating 5 out of 5

The quality is at the level, I am satisfied with everything.

In general, buzzing. We won't know how many filters are adequate until we try. At the very least, seventy hours are required. It was taken for the purpose of soldering any garbage from a computer and then erasing cotton swabs with a solvent from the soldered garbage in order to remove flux residues. Maintaining one's health is essential. I don't know what you call it, but it's probably a "storage bag." It's probably made of polyethylene and has a ziplock on it. My mental image of a bag used for

Pros
  • Perfectly adjacent to the muzzle of the face, does not smell, and the muzzle is a comfortable texture. Nothing was found anywhere after closing the holes in the air supply. Exhalation is simple and almost identical to exhalation performed without a muzzle; that is, there is no sensation of being suffocated that one gets when exhaling into a muzzle and waiting for the air to escape through a hole in the device, as if one were trying to inflate a ball. There is no such item available in this location.
Cons
  • I finally gave up looking for the location of the latches and applications on the garments because the instructions do not contain any photographs, there are no videos, and there are no image standards on the internet. In one of the films, the individual often screwed the filters into the front of the camera instead of the back, as one of the reviews points out.

Revainrating 1 out of 5

Terrible purchase, only wasted money.

I wore it 1 time and realized that I just threw away 1400. I do not recommend, especially for those with a small head. The respirator is rather on the average head.

Pros
  • No
Cons
  • Bad smell of rubber Too big, although I ordered size s Does not protect: air passes where the bridge of the nose and on the sides of the mask with all odors, substances and viruses At the same time, it presses under the chin, no matter how you regulate Hoop with sharp edges and head straps. While filming, I got hurt.

Revainrating 5 out of 5

Valuable purchase, nothing but pluses!

Its pros: There is no smell, the material is quite soft, boxes and filters from 3M are suitable and, accordingly, analogues for it from ali or Amazon. Dust with native filters filters well. Has some cons: expensive consumables from JETA SAFETY, although from 3m even more expensive.

Revainrating 5 out of 5

Matches the description completely, very satisfied.

Pros: Soft fit to the face. Good packing. Filters in a vacuum bag. The test with very smelly paint on concrete went well. Cons below: There are 3 sizes of masks. It is not clear how to select them. I didn't see a description anywhere.

Revainrating 5 out of 5

I didnt expect the quality to be so high.

We use a half mask in painting and when grinding. They chose an analogue of ZM, because it's a little expensive. An excellent set in which there are even gloves, the list is in the description. And the mask is already all assembled, saving money. There are no complaints. Convenient to use: can be washed, because it is disassembled. When breathing, moisture does not form in the mask, the filters work perfectly, there is no smell of paint and dust, and what else pleased you can attach the filters

Pros
  • Great kit
Cons
  • No

Revainrating 5 out of 5

The ratio of price and quality is very pleasing, I will repeat the purchase.

An excellent set, packed in a beautiful and high-quality cardboard box, the filters are sealed in a vacuum bag, it sits comfortably, there is a clasp on the neck, all straps are quick-adjustable Here someone wrote that he stinks of Chinese rubber, he was mentally ready to air it, it turned out that it DOES NOT stink, the rubber is of high quality, it does not smell of anything.

Pros
  • Very comfortable, high quality respirator
Cons
  • Not found yet

Revainrating 3 out of 5

It's not a bad product, nothing extraordinary.

I ordered the size “S”, I searched, I looked everywhere. Found the right size here. I ordered. Not only did I pay for express delivery of 250, the courier arrived at the wrong time. SO ALSO THE SIZE arrived "M". As a result, I could order the size "M", CHEAPER, and also with free shipping. Got pros: Everything corresponds to the description, except for the size. Got cons: The size is indicated “S”, but in fact they brought “M”. There is a smell of rubber.

Revainrating 5 out of 5

The perfect product for any user!

Its pros: good filters, does not pass odors quickly removed / put on, taken off conveniently hangs on the neck With its cons: after opening the package, it smells of rubber. No smell after a day

Revainrating 5 out of 5

It's the best purchase I ever made, I will definitely do it again.

I definitely recommend buying. Previously used disposable junk. This is heaven and earth. Before it was necessary to buy, health is more expensive! Works, painting the stair frame, within an hour, working with solvents, rust converters in the room, all silver. I also connected the sewer, too, zero smell. Shtrobil walls, cut concrete with a grinder, dust in a column, class respirator, saves! If breathing becomes difficult, the dust pre-filters must either be removed or replaced. The set is…

Pros
  • Great respirator! Comfortable, size M, medium. On the face clearly, densely located. During work, even an hour, the face does not sweat much. No irritation. There is no smell from the material, if only by unpacking quite a bit. Some write that the stench is straight, nonsense, probably just too sensitive.
Cons
  • Price. Until the new year 1100, 1200. Now more than 1700. It's a nightmare, not prices. Everything for the people!

Revainrating 5 out of 5

I am amazed at how well made the product is, just magical!

This is the second set from this company. Before that I took R 5500. Comfortable masks. Size L fits me perfectly. If the size does not match, the mask slides or presses. Here the mask does not put much pressure on the face. I had to work in it for two, three hours. Fine. I use it for electrical wiring. When cutting a strobe with a grinder, strong dust comes out. These respirators have a convenient mount for filters. Here, under the top plastic cover, I put on disposable masks (which are from…

Pros
  • These 6500 and 5500 masks have low inhalation resistance. It's easy to breathe. Convenient fastening, allows you to quickly put on and take off the mask.
Cons
  • There is a chemical smell on first use, but it goes away afterwards.