🔧 Enhanced Rear Sway Bar End Link by Rubicon Express RE1155 Review

I use LJ Wrangler on 2.5" OME suspension lifts - RE1155 stabilizer links accounted for almost all (if not all) lost travel due to use of Restore standard connections with my lift.

Website says these work with a 4 inch hub. I have a 4" lift and they are too short. If I had them installed maybe the swing bar would be pointing up, not parallel. A good product just doesn't perform as advertised.

As mentioned in several other reviews, the sleeves are too big! I guess I was just hoping the other guys had oversized bolts, but my 1997 TJ bolts were too small too. I'm trying to contact Rubicon Express to see if I can get some cases but that doesn't help me much now as I'm changing them over the weekend.

I bought these for my 2006 lifted GMC Yukon XL Denali. It features 0-3" Bilstein shocks, stiffer rear springs, accessory bags and 2" coil spring spacers. Those rear links gave me that extra inch or so I needed to get everything working. I will eventually opt for the longer ones but these have been great for over 2 years now.

As mentioned, the hub diameter is too big for my 2001 TJ with stock stabilizer bar and frame. Contacted RE and they confirmed the problem, sent me a bunch of the exact same links with the exact same problem. They have a hole diameter of approx. 14 mm. My standard hardware is 11mm on the stabilizer bar and 9mm on the frame. It's anything but close. Don't waste your time or money.

Like the other commenter the sleeve id was too big. I called Rubicon Express and they said they hear about it from time to time (Jeep must have used different screws in certain productions). Anyway, the Rubicon tech support guy put me on hold and personally sourced replacement bushings. They sent it to me for free. I don't know how they will hold up but the customer service is top notch. Be patient, it will take some time before you receive your call.