🦈 SharkBite U248LFA 90 Degree Elbow Connector | PEX, Copper, CPVC, HDPE Fittings Review

With a motor home, the question is not "if" but when a leak will occur. I keep them handy as they're worth their weight in gold when it comes to fixing a leak! So simple and effective

I've used these shark bite tools a few times. So far I haven't had any leaks at all. It's a lot easier than fumbling with thread tape or self-adhesive PVC fittings. Get the right tool to put them on and a small removal tool and you can even take them off and put them back on if needed.

These things save lives! I have several of these in my RV and have used them several times. Anytime I have a hose that's loose or badly connected, I don't even try to fix it. I just cut off the old clip and put one on. It is repaired in seconds and will survive ANY collar.

If you want to do your own plumbing repairs but don't like the idea of soldering copper or buying special tools to join PEX pipes, give these a try. Simply cut the pipe or hose and insert into the fittings. It is so easy. When I first used them I thought there was no way they could leak like a sieve. You don't! They really are that light. They may cost a little more than traditional fittings, but the time saving is well worth it.

I live in a very rural area with a small hardware store so I have to order almost everything through Revain. Contrary to what they say and the youtube videos tell you, there is no easy way to undo this. My local hardware store didn't have small sections of standard PEX so I bought the red section thinking it should work fine for the 8 inches I need, but it was wrong once I watered the connection Had installed and turned on, it started leaking heavily. an hour of swearing and sweating to open…

I've only recently discovered Sharkbite products. To be honest I haven't needed plumbing for a few years now. Who would have thought that plumbing could be so easy. Yes. I just took the tub out of the bathroom and had to change the plumbing. I was willing to buy more copper connectors and take some propane. But no! It is so easy. Simply grab the flexible hose and required fittings and connect them together and you'll be done in no time. The best thing since sliced bread. And yes, I was there…

Can't say enough good things about Shark Bite fittings and valves! I had a small plumbing project that would have taken me hours to complete the "old fashioned" way and Shark Bite got me done in minutes. literally! I haven't noticed any leaks at all, and installing Shark Bites is so easy even a child can handle it. Yes, they cost more than traditional plumbing parts, but the time savings are worth it. Based on the research I have done, I am confident that the Shark Bite products I use will…

It took me a while to trust these things. I'm good at soldering, but it's much more convenient and safer than soldering pipes with a flashlight. The reason I hesitate is because I've seen a few examples of the latest and greatest building materials. or long-term unimplemented recommendations. For example, aluminum cables that were installed in many homes in the 1960s. Or jumpers built according to the code of the time that sag over time. So the idea of putting these things behind walls where…

Sharkbite fittings not only helped me replace 2 male nipples, they were so easy to use that I put the tip where I needed it for a long time. I inserted 23 feet of copper pipe in place using various types of Sharbite fittings. Very easy to do! I would recommend you to buy a release tool. And yes, they can be removed and reused. Also, get a deburring tool that not only removes the burr, but also when you insert the pipe all the way in, which is the depth it should be in the fitting. I just used a