⚡️ High-Performance Siemens Q2020 120V Breakers Review

20/20 went in perfectly and safely. Had to use a wire brush to get the 30/20 into the latch. But both work. Now I have to order lampshades and coolants as well as lightbulbs and fuses.

Very disappointing and a waste of time and money, the breakers broke like they had been thrown down the stairs, not to mention broken. They do not snap into the on position for use.

I bought these when I bought a Siemens 125A fuse box. They don't fit the grommets on my box. The ear piercing is not deep enough. Our local big box stores only sell them for 2 pole switches. I think I'll have to stick with single pole switches.

Make sure your panel accepts tandem switches. Little did I know that this product would work well for my application. Look at the diagram on your panel and it will show which slots are suitable for this type of dual switch. Sad but happy with the product. For those who don't fit in here, there's a good chance your panel won't accept tandem switches. FIRST THE MANUFACTURER MUST cut a notch in the blade! Not within your code and specifications after installation.

My existing breaker for an old ITE panel is failing. Tripped for no reason. I checked the wiring, it's ok by me hooked up another switch. Most hardware stores, including Home Depot, don't have them. I'm checking my 1" C/B called Model QP. This breaker is QT (called QT because it is 1/2 size with 2 slots). I read an earlier comment from another reviewer that it doesn't fit. Another person refuted and said that it is suitable for the ITE panel. I took the risk of buying 2 20A QT and 1 15A QT. I…

I ordered a 20 amp double breaker and received a 15 amp double breaker. deal with it, but Revain needs to step up his game a bit. However, in this case, I'm dissatisfied with Revain. Electrical devices and components must correspond to those declared. No more and no less. Luckily I'm an electronics engineer and have some electrical knowledge. This switch is 5 amps shorter. Per electrical codes I am recommended to have a 20 amp switch for this replacement. Since it doesn't cause a fire but…

The QT2020 circuit breaker is a CTL (Full Circuit Restriction) circuit breaker and can only be mounted in specific locations on the circuit breaker panel - typically the bottom 4 slots in the cabinet. The bar at these lower locations has cutouts to accommodate a CTL switch (and a standard switch). These switches have "locking tabs" that prevent them from being installed elsewhere and thus limit the total number of circuits that can be installed in the panel. What really adds to the confusion is