SNGL H1 LED Fog Light Bulb Blue 8000K Extremely Bright High Power H1 LED Bulbs For DRL Or Fog Light Lamp Replacement Review

The problem with the pancake design is that there are physically two opposing lighting surfaces. This creates a double "image” on the road. There are a few OTHER designs that explicitly address this, but they don't have standard sizes and are usually TOO BIG to fit in standard suitcases. The brightness corresponds approximately to that of a halogen. Since the surface is perpendicular to the road and NOT pointing directly at it, the reflective part of the body plays a HUGE part of the overall…

Bought for my 98 Civic fog lights. Bright for fog lights, but they don't look like 6000K color temperature. They are more like 5000k 5500k color temperature. Also, the LED chips are supposed to point left to right, but due to the design of my fog lights, they could only be positioned in one direction, causing the LED chips to look up and down. So I used a dremel to make dots on the base of the lamp so I could position it correctly. I noticed that every H3 LED fog light I've seen was made this…

Purchased for my 2013 BMW 335i (E92) RWD M-Sport with Adaptive Xenon headlights to use as turn signals. I've already coded all my errors through NCSExpert, so I can't tell if they give a code or not. The initial test looks about as bright as standard halogen bulbs, but white with a blue tint much closer to factory xenon than amber halogen bulbs. Although I'm very happy with the result, let's see how they will turn out. At night, but also during the day, they look very bright. Because the base…

Bought these for extra street lighting for the occasional night out of town on our 2015 GMC Yukon. When I get home I drive through a lot of country so I have to use fog lights with headlights. They were a perfect match for my MostPlus brand LED headlights (in my reviews) that I had just installed and they were bright white 6000K too. Performance was similar but not exact so I wasn't sure what it would look like. but it was great. It illuminates the road very well, twice as bright as my…

I have a car project that uses large electric cooling fans and an electric power steering pump and the alternator isn't quite doing its job when everything is working. I realized that by switching to LED lighting at 100%, I can reduce energy consumption so that the engine does not stall due to lack of voltage when stopped at an intersection. These lights are my third set. I have a H4 size set and while they work they need a projector body to avoid blinding/glaring oncoming traffic (even with…

There aren't many options for H1 Amber LEDs and this was the best choice I could find. The build quality seemed solid. There is no fan, but the base of the heatsink is solid metal. Installation was fairly easy, but not wanting to cut the existing wiring I had to purchase an adapter for the H1 jack. I chose "KOOMTOOM H1 Adapter Harness Connector" at Revain. This made it easy to connect everything. Brightness is ok. I would say it's a small improvement over standard halogen bulbs, but not as big…