Task Tools T25647 2 Inch Diameter Review

This is a regular wheel but it is a very light steel wire with a brass finish. The brass peels off instantly with use, so it's essentially a steel wire wheel. The mounting hole is also different from my other stock wheels so I had to fiddle around with shims and spacers a bit to get it centered in my grinder.

I wouldn't call this a good product, it's quite aggressive and unless you're removing heavy rust. I wouldn't recommend it unless you want to completely repaint what you're cleaning. Also loses quite a few bristles. Get what you pay for.

I installed it on a Delta 6" variable speed bench grinder. I used it to remove rust from Shopsmith parts. I had to do a 1/2 "Buy mandrel to match my coffee grinder. The hole is actually 5/8" with a 1/2" plastic spacer. My only concern is that it's not actually a brass brush, it's a brass brush that leaves more scratches than it should. It removes rust but has built up a lot of grease and oxidation and has turned black with use. He has also lost some bristles. I'll look for a better one next…