Thetford 07101 Toilet Blade Seal Review

I have a 2017 Thetford Porta potty and there is no obvious connection between this part and my toilet but this gasket doesn't seem to have other sizes so I took a chance and it fits perfectly.

I bought this as a spare for a portapotti in a camper van. As a result, the old ones bent and began to lick a little. He put on nitrile gloves, pulled out the old one with his fingers, squeezed the new one. Smeared him with some plumbing grease to help him get started. Fits perfectly. No mute smell from the tank or dripping when emptying. And at a very reasonable price! Just ordered a replacement part.

We have had several Thetford toilets over the past 25 years. Electric flush models work best. Replacing this gasket is usually caused by the formaldehyde toilet chemical coming into contact with it when you pour it through a large diameter hole to dump it into the holding tank below. If you take care not to get anything on the filling, it usually lasts three to four years, even if, like me, you go to the bathroom every weekend. This filling is very easy to change, anyone can do it.

I have an old (1993) Sears Pack-A-Potti that is no longer manufactured. The lip seal ripped many years ago and didn't fully cover the lower tank, so we gave up on it and still kept it in the garage. Earlier this summer I decided to see if I could have it repaired for emergency camp use. After seeing Thetford, Inc. on one of the parts, I checked out the Thetford lip seals on Revain and found one that matched the exact size of the torn one I bought, installed and tested over the summer. Worked…

My toilet started to smell after a few years of regular use. After water is added to the bowl, it drains into the storage tank. It's time for a new print! Replacing the filling took only a few minutes. Now it's like new! Use a flathead screwdriver to pry out the original gasket. The screwdriver starts and then comes out easily by hand. Once removed, take this opportunity to clean the plastic slider. I had to scrape gently with a wooden popsicle stick. Finally, slide the new slider into place…

When looking for gaskets to replace a worn toilet on our boat it was VERY difficult to find the right one so I wanted to give a quick overview to show exactly which toilet to choose. seal for. This was perfect for the 875 and 885. It was very easy to install and worked straight away. The model/stamp numbers are completely hackneyed and cannot be understood from the diagrams/drawings. Imagine how disgusting it was to look for numbers on our broken seal. I just saved you the trouble. Please!

If you select 5 stars for a rating it says I love it. Well I can't pin any part of the portable toilet as my 'favorite' but it fixed a leak in my Thetford potty and that's the main thing! Lift or pull the old one out, lubricate it with Super Lube or silicone grease and insert it into the gasket pad (the groove where the gasket sits), making sure the gasket with the lip is trailing shows above. That's all, there are no more leaks when carrying the tank. I'm glad Thetford offers a replacement…

I use this portable pot all the time because I live offline and found that after a year the old gasket was leaking liquid from inside the bowl into the tank. It still worked, but I knew the rubber gasket needed replacing. Luckily I found a replacement and found it easy to install. You just have to remember that the old one comes out with the little lip going back the same direction I think it was on top. I also wore disposable gloves. The toilet is like new again and will hold water or liquid…