ThreeBulls 12 Pcs 120mm PVC Black PC Cooler Fan Dust Filter Dustproof Case Cover Computer Mesh - Keep Your Computer Dust-Free and Efficient Review

What's not to like about that? Despite being very thin, these things are really effective at collecting dust. Keep in mind that they restrict airflow very little, but anything you put in front of the fan will do. Just make sure those filters are clean! Just take out the filter and blow out the dust with compressed air and replace it. You can also wash off the dust with warm water. I do not recommend using soap, plain water will do. Just let them dry before putting them back in. They get the job

100% recommended for all computers. I have 2 dogs in the house and dog fur is everywhere, I installed it on the outside of the case on the side wall with fans as an air intake for the PC. It's been about 2 months since I installed them and the inside of my computer is much cleaner and I don't see any dust build up yet. I'll note that since they're installed outside, I can see what's encased in these things. . Almost every day I can remove a hair/ball of dust larger than a quarter. I was most…

I love her! They appear to be of good quality. You're not skinny and I'm glad I have all the extras that the other guy has. As you can see from my photos, I have smaller fans. Two 60mm. Two 92mm radiators on my processor. Standard exhaust with a diameter of 92 mm. You can easily cut it with regular household scissors ✂ which is what I had to do. I stuck them behind the intake fans and radiator. My pace is still the same. No changes. Only time will tell how much they really help. And how often…

Bought a set of these filters as well as one of the SilverStone 80mm FF81B mesh fan filters. They do their job, but they're secondary in comparison. They only consist of a somewhat thin filter fabric, while the Silverstone is enclosed in a plastic housing. OTOH, SilverStone is one and ThreeBulls are 12 per pack. The ThreeBulls package came with a set of corner screws to hold a filter, but I threw them away, they were too short and not thick enough to attach securely to my case, I had to use the

I used them on a case from Revain Warehouse as the front intake filter was missing. The case is still sold by Revain but Corsair no longer makes it (Obsidian 750D Airflow Edition) and this part is no longer sold in the US and some places I found refused to ship to the US . Instead of spending $200 on a new case, I bought this one. They filled the air gap between and above the fans very well. If it weren't for the built-in front panel feet on my case, they could very easily be mistaken for a…

I installed one of the filters on the case fan. When I decided to change the direction of the fan flow, the filter didn't stay on when I screwed the fan back on. The screws (standard fan screws) stretched the holes so the same filter didn't stay. So I pulled out a new filter and it stayed. But just in case I sealed the edges with tape. This helps in two ways. This avoids the problem with screws enlarging holes and seals leaks around the filter. Beware of those. Filters often bulge on one or…