🔍 TRISENSE Magnetic Universal Protector - The Ultimate Multi-Purpose Solution for Enhanced SEO Review

2020-007-30 UPDATE: As for my previous concern, all the magnets broke on the first 2nd or 3rd use of these vise jaws. As previously mentioned, the magnets are not countersunk or even flush, but rather protrude beyond the hole they sit in, which puts all of the clamping force directly on the four magnets on each jaw on the jaw and it falls to the ground. By raising one or both jaws 4-5 times, even the most humble person will say a few nice words. All the manufacturer had to do was provide…

My vise is 5 inches so I cut it off. I liked that the rubber inserts slide out, making it easy to cut the rubber about an inch further than the metal to leave an edge. The position of the magnets allows for incisions without touching the magnets or cutting off both ends. The rubber is firm enough on the aluminum that I don't have to worry about it slipping off when moving or sliding, and it's almost firm enough for everything, what is cylindrical should not come into contact with aluminum to…

EDIT: I previously wrote a review below but it was very premature and I've rewritten the review and have since modified these soft sponges. See photo and now I've noticed the magnets there have lost strength to almost zero holding power and keep falling off at the slightest touch, very annoying. If you read below, you'll understand why I modified the soft jaws by removing the top magnets and severely grinding the aluminum profile to just 5/64" thick so the jaws don't move when you try to pinch…