🌈 upHere N1055CF CPU Cooler: Dynamic Rainbow LED, 5 Copper Heat Pipes, 120mm PWM Fan, Aluminum Fins for Optimum Cooling Performance Review

Looks amazing and the cooler installation was probably the easiest I've ever done other than the included Ryzen coolers. Temperatures seem to be a bit higher than I expected compared to the tried and tested 212 evo, maybe 5 degrees warmer on this build with the r3700x than the last one I did, but this one also tends to be consistently much higher to rise will be a difference between the chips. In any case, the temperature stays within acceptable limits, the maximum temperature is 75 degrees…

I ordered this one because it seemed a bit too much even for me due to the number of heat pipes, and with the LED backlight thrown over it. Received the next day. The box was partially open underneath, which was lying on my porch, but everything seemed to be there. I looked at the heatpipes on the bottom and they smashed to one side until they misaligned so the contact surface that would press against the CPU wasn't flat. Tried to move it to line them up and mostly successful. But then when I…

NOTE: Item will be returned. I will update when a new one comes out. _/_/_/_/__ Obviously not that extreme. But the bottom edge was flush with the base, and the top was 2 mils higher. Due to this, the system has a minimal contact area with the processor and does not work. Secondly. Two of the five heatpipes had holes at the bottom and most were unsealed at the top, causing the system to not work. On the other hand, the fastening system works perfectly. It is very clear and easy to use. EDIT…

I ordered this cooler to upgrade from a small stock cooler that was on my Ryzen 5 2600. I like to overclock, but I've never thought about how bad the stock cooler is. I chose this one because it looks good, is cheap, and cools my CPU better than stock. After receiving the cooler, I removed the normal one, cleaned all the thermal paste and started installing a new one. one. At that moment I realized that there were no gaskets in the box to fasten it! I highly recommend making sure you have…

The cooler looks good and works well IF it can be installed. The brackets are soft metal, painted to look like steel, but they're not! The two main mounting bolts that connect the cooler to the brackets must be screwed directly into the brackets. However, since the screws are real steel and there are no staples, they will eat away at the threads making it impossible to attach the cooler! In order for it to stick, I had to bend the brackets so that the screw holes would fit snugly. However, it…

To be honest, for the price this is a great CPU air cooler that offers great looks. 9 mins My stock Wraith Spire cooler (the one with the copper plate underneath) showed 84c. I could get a little more out of running the test longer than 6 minutes (let's say 86c). Swapping out for this cooler with the same MX4 thermal paste, I had reached about 70C after 9 minutes and didn't seem to get there. I adjusted the fan a bit and now it stays at 67C at max load. Although it took longer to reach the…