🕷️ Versatile 10-Arm Industrial Ceiling Spider Lamp with Retro E26 Edison Bulbs - Adjustable DIY Modern-Chic Pendant Lighting for Bedroom, Dining, Living Room, Kitchen, Coffee Shop (2m Wire) Review

We ordered the six handed version and I think I should have read the reviews carefully. All wiring is disconnected and two wire nuts are not big enough for wiring. Be prepared to spend a lot of time figuring out how to wire it up. In our case we found an extra wire, cut two pieces and connected them with a nut with six pins for each polarity, leaving us with one wire for each of the connectors. The instructions are terrible. They say almost nothing and show a few drawings without indicating…

We love this light. I complained about the lack of light in the kitchen due to the track lighting we installed. That helped. We have a 10-armed lamp. The wires are 7 feet long and definitely require some electrical engineering knowledge. In the end we made a pigtail for the wiring because we thought we would get a better connection that way. A lot of wires just fit in one cap. We simply screwed the ground wire into a screw on the metal plate that came with the light. We also didn't bother with…

Luckily I know what I'm doing. Assembly required. It's not very straight forward. Each wire needs to be passed through a hollow nut and bolt and then attached to the base. Then you need to strip the wires etc. I used 4 port quick connectors and cable ties to connect. Along with some better quality wire nuts. I cut three 8" pieces of black 16ga wire and three 8" pieces of white 16ga wire that I had lying around. I grouped 8 wires in groups of three. Two groups get three wires by hand and I cut…