🔧 Highly Functional Ventline BV0115 04 Operator Assembly Handle for Superior Ventilation Control Review

Good replacement but the screw holes are different than what they replaced. I had to drill a new hole for one of the holes to make it work. This one is about 1/4 inch shorter. It also doesn't line up with the breather strainer crank hole. Take your time with the installation to make sure everything is lined up before drilling.

Works well but the clamp that holds the working rod in the lid doesn't work very well. The "e" clip might be the best choice. One of the screws was too long and prevented the lid from closing completely. I removed the screw, cut it on the mill, and everything was fine. Pay special attention to the fastening part of the handle and the cover. They either have a plastic guide or a metal circle through the slot.

I bought this for the air vent in my 2011 Fleetwood Tioga 24DSL RV. The shape and proportions of the item appear to be the same as the one I replaced. While they look very similar, they are not the same. The size and spacing of the two fastening screws do not match. The mounting bolt spacing on this Ventline BV0114-04 is 2-3/8 inch. The clearance on the one I'm replacing is 2-15/16 inches. I was able to use the one-bolt Ventline as a temporary replacement. to mount it (the distance between a…