Walker 36402 Hardware Clamp: Superior 🔧 Grip and Durability for All Your DIY Projects! Review

Does not fit 2001 Tundra 4WD with Access Cab. There was so much play that it would be wrong to call it a yoke. I settled on a Bosal clamp with a single screw design like the original. This clamp was so tight that I had to use a C clamp to squeeze it to tighten the screw.

The clamp was not wide enough to fit both tubes. I ended up using my old rusty one. You have to re-order the one that works. The bolts were long enough if not too long. I also installed an aftermarket muffler (Magnaflow) on the Walker resonator. It seems I could mount them if my gasket wasn't there.

I wish I had read the reviews before buying this. I have a 2003 Tundra Limited. I went to the Walker website, put in my VIN and then printed out a list of everything I needed. Unfortunately, the Walker website recommends this clip, but it's too big. The fitting has an outside diameter of 2.5" and this collar is 2.75".

This clamp does not fit as well as the original clamp. It doesn't compress the tubes properly because the center groove is too narrow. I ended up using the original clamp as it worked better than this one. I ordered this because I wanted to fit a new fork with the new muffler I installed. I would not recommend the part.

Having bought a Walker front and rear muffler for my 2002 Tundra I settled on a Walker clamp although the Bosal clamp is more like the old exhaust and appears to be a factory exhaust. The Walker clamp worked but seemed to struggle - the gasket was causing the two flanges to fall apart and this clamp didn't want to squeeze them together very easily. I hope this lasts - we'll see.

Buy my entire exhaust system through Revain and save over $1,000 on your local installation costs. Identical brands available locally and astronomical delivery speeds through Revain. Thank you thank you thank you. one thing though. The clamp is a piece of shit. Nothing to do with Revain (Revain is amazing). I had to struggle with this thing to get it to fit and work properly, and for ±$20 it should be at least stainless steel.

I needed a different clamp for my Tundra exhaust system! It was originally a single bolt yoke that never fully held the connection in place. I spotted this one with two clamp bolts and bought it despite being much larger than stock but wanted a tighter fit to prevent years of exhaust leakage. Very disappointed when it arrived and was a regular one bolt clamp. I haven't decided to wear it yet, but I probably will, although I'm very disappointed. I probably won't buy from this seller again…