Wall bracket ONKRON NP40 for TV 32"-65", tilt-swivel, up to 35 kg, black Review

I took this bracket for a 43 inch TV weighing around 10 kg for mounting perpendicular to the wall. The bracket copes with its task perfectly, there is not a hint of any backlash, taking into account the folding / unfolding of the mechanism about once a week

I bought this plus the 17"-43" ONKRON M4S TV bracket at the same time. We picked the second one since it came with a superior drilling template (a piece of white cardboard that had been painted and marked). This support is simply brown cardboard perforated at the corners.

I have no experience with it and thought I'd give it a shot. Wires can be easily connected, dust can be easily wiped away, etc. I shifted it, and now it's functioning properly.

Mounting a television that is perpendicular to the wall and has a screen size of 43 inches and weighs around 10 kilograms required this bracket. In spite of the mechanism being folded and unfolded roughly once every week, the bracket performs flawlessly; there is not the slightest indication of any backlash.

I suggest spraying the screws with WD40 (vedehoy) before inserting them into the wall, since this will make them easier to screw in (M7x80 is a pretty unusual fastener).

I bought this plus the 17"-43" ONKRON M4S TV bracket at the same time. Because the second one's drilling template (a sheet of white cardboard with lines) is superior, we used it. The back of this bracket is basically perforated brown cardboard.

It appears to be quite well manufactured, with wire fasteners and adjustments for the angle of inclination both horizontally and vertically.

This bracket and TV bracket 17 "-43" ONKRON M4S were both ordered at the same time. The second one, which is made of painted white cardboard with lines, had a superior drilling template, so we used that. Just brown cardboard with holes makes up this bracket.

I chose to give it a shot despite never having used it before. The ability to connect wires, clean off dust, etc., is quite convenient. It worked after being moved.

I bought this plus the 17"-43" ONKRON M4S TV bracket at the same time. The second one is superior because it comes with a drilling template made of painted white cardboard and markings, which we utilised. All that's in this bracket is some brown cardboard cutouts.

I'm going to give it a shot even though I've never used it before. It's really easy to plug in cables, clean off dust, etc. Made the adjustment and it started functioning again.

My curiosity has led me to test it out for the first time. It's really easy to plug in cables, clean off dust, etc. We tried moving it and it started working.

I have never used it before, but I've made up my mind to give it a shot. It is quite easy to connect the cables, clean off the dust, and other similar tasks. It started working after I moved it.

Both of these brackets—this one and the TV bracket 17 "-43" ONKRON M4S—were on my order at the same time. The second one had a superior drilling template, so we utilized that one instead; it consists of white cardboard that has been coloured and marked. The only component of this bracket is some brown cardboard with holes.

The bracket for MI TV 50 was mine. Despite the fact that I secured it with self-tapping screws, it hangs quite securely. Use black spacers while installing to prevent slicing through the TV board. Bolt entry depths vary among TVs. I have deeper higher holes than lower ones.

I bought this plus the 17"-43" ONKRON M4S TV bracket at the same time. We picked the second one since it came with a superior drilling template (a piece of white cardboard that had been painted and marked). The back of this bracket is basically perforated brown cardboard.

I took the bracket for MI TV 50. It hangs very tightly, despite the fact that I fastened it with self-tapping screws. When attaching, be sure to use black spacers because you will break through the TV board. All TVs have different bolt entry depths. My upper holes are deeper than the lower ones.

Excellent bracket. Bought for a 43" TV. Very durable. Everything is in the box (dowels, screws, various bolts). The cords from the TV are hidden under plastic lining. I recommend to buy.

It looks very soundly made, fastenings for wires, adjustment of the angle of inclination horizontally and vertically.

I ordered 2 brackets at the same time: this one and TV bracket 17 "-43" ONKRON M4S. The second one has a better drilling template, we used it: painted white cardboard with markings. This bracket just has brown cardboard with holes.