📺 Enhance Your Viewing Experience with the Wall Mount Arm Media LCD-415 Black Review

For a long time I was looking for a bracket with a reach of 600mm, because. the placement of the TV was planned in a combined kitchen-living room and there was a need to rotate the TV by almost 90 degrees. The choice fell on this model because. here it is possible to adjust the bracket in different directions and angles of inclination. The diagonal of my TV is 55 "(140 cm) - large, but light 12 kg, there were fears that the bracket would give somewhere an unnecessary tilt. This bracket coped…

Basically a good bracket. I ordered in the Photo warehouse - at first my order was not processed due to a failure, and then they brought it to the pick-up point, but did not unload it - they lost it, and found it a day later. Shop Fotosklad put 1 with a huge minus!

Most importantly, I got the opportunity to turn the TV from two almost opposite points. This is almost 180 degrees (in fact, less) - from the sofa located opposite the wall where the TV hangs, as well as from the table in the kitchen, deploying this whole structure. It's not very visible in the photos, but you can see it.

Good bracket. I hung up a 55 ' diagonal TV (the maximum possible, judging by the inscription on the box). VESA 300x300. The TV weighs 17.3 kg (i. E. a large stock). At first I discovered that when pulled out, the TV on this design tends to “leave” to the left - I tightened 2 nuts on the bracket and everything became ok (fixing to the wall strictly according to the level). Complete capercaillie - M6 (holes in the bracket are also for this diameter). I used my own (also M6, but a little longer)…

instead of regular dowels, I bought a fisher UX 10x60 and longer capercaillie. to reduce the number of wires hanging down, I also placed a router and a "pilot" with sockets on the bracket.

The maximum distance declared by the manufacturer from the wall is achieved only when the TV is moved as far as possible to the right / left from the center of the extension frame that the TV is hung on. In this case, accordingly, the center of gravity of the TV is shifted from the axis of the bracket, and the load on the extension frame is distributed unevenly. As a result, the TV gets a noticeable roll of 1-2 degrees from the horizontal. A trifle, but striking. Partially, the roll can be…