Weather station measuring the temperature and humidity in the room HTC-1 Review

HTC-1 digital clock features:Air temperature measurementAir humidity measurementBuilt-in clock and alarm function12/24 hour modeCalendarDesktop or wall mountableSpecifications of HTC-1 thermometer:Temperature measurement range: -10°C~ +50°CTemperature measurement accuracy : +/-0.1°C Humidity measurement range: 10%~99% RH Humidity measurement accuracy: +/-5% RH Display type: LCD Power supply: 1 AAA battery, 1.5 V Dimensions: 100 x 110 x 22 mm. Weight: 145 gr. Operating procedure: In the normal state, the display shows the current temperature and humidity. The device saves in memory the last values ​​of temperature and humidity of air. Pressing the MEMORY button once displays the maximum (MAX appears for a hint), the second press shows the minimum temperature and humidity for the time elapsed since the last reset (MIN appears), the third press returns the hygrometer-thermometer to the current values ​​display mode. Holding down the MEMORY button for a few seconds resets the previous extreme values. Setting Time and Date In Timekeeping Mode, press the MODE button for 3 seconds. As a result, the minutes digit will flash. Then press ADJ to set the minute digit. Briefly press the MODE button, set the hour, then the date. If no further action is taken, the instrument will return to Timekeeping Mode after 3 seconds. Setting the alarm In the current time display mode (the dots separating hours and minutes are flashing), briefly press MODE - the display will switch to the alarm setting mode (the dots do not flash). By pressing ADJ, you can turn on the "Alarm every hour" function ("Alarm" will appear) or the alarm (the icon will appear on the display))) ) Press the MODE button again and hold for 2 seconds, you can set the alarm time (on the display icon •))) ) will appear. From the alarm setting mode, the device automatically returns to the current time mode after a minute or by pressing the MODE button. Temperature Unit Switching: The °C/°F button on the rear panel is used to switch the temperature reading from °C (degrees Celsius) to °F (degrees Fahrenheit) and back in time mode or date mode. Complete set: Device (1pc Battery = 1.5V type "AAA" (1pc Operation manual (1pc) The warranty does not apply in case of mechanical damage to the case and component parts of the product, use of the product for other purposes, unauthorized repair of the product. The manufacturer has the right to change the design, technical characteristics and packaging devices without prior notice. Manufacturer: China