White Timetec Pinnacle Konduit 16GB KIT(2X8GB) DDR4 3600MHz PC4-28800 CL18-22-22-42 XMP2.0 Overclocking 1.35V RAM For AMD And Intel Gaming Desktop PCs Review

[Edit} 3 years later, this ram is performing better that before, since I have upgraded to a processor with a better memory controller. I was able to Overclock this ram to 3733mts CL16-19-19-40. This is much better performance than advertised.and once again this is with 4 Dimms/sticks. It's earned an extra star.Check your QVL list, your motherboard might need a bios update if it was early manufacture.It's single Rank ram, one memory controller per stick. Dual rank with 2 memory controllers per…

Used the 64GB Timetec 3600Mhz kit to upgrade a non XMP set on an Asrock B550M paired with a Ryzen 9 5950x. Was able to tighten the timings to CAS 16 with this kit at 3600Mhz. It passes memtest with no error! Despite the few negative reviews about the base speed, all ram past 3200Mhz is technically overclocked via XMP. The manufacturer bins chips to see how well they run above their base speed to create a stable XMP profile. Compared to other products TimeTec uses high quality brand name binned…

I have 2 of these kits now for a whopping 64GB total. I was able to get all 4 sticks to play nice together @ 3600 16-19-19. took all day of fiddling with settings, but it does pass memory tests finally. it's slower timings than what I can do with just 2 sticks but not significantly.I think this is a great set for the price and I'm happy with the timings I was able to get. and being normal size it fits all sorts of places other sticks don't, though not quite low profile

Lies, deception! So I got 2 32GB kits, so total of 64GB of 3600MHz RAM. When I turned an XMP profile on the system wouldn't even boot. I tried all the options for timings but system would not boot with 3600MHz speed. It only worked when I changed the clock speed to 3466MHz. So if you are expecting to squeeze all the performance that has been advertised you got a problem.Edit: Found out that my motherboard was the issue, it's a MSI B450 gaming cabron pro ac. It doesn't support memory over…

Ordered 3600 ram but when I installed ram only showed XMP profile for 3200mhz speed. Double checked label on ram and it showed 3600mhz sticks. Unable to overclock sticks to 3600mhz. Short time after receiving sticks was notified by company that I may have recieved incorrectly labeled 3200mhz ram.I want to applaud company for reaching out and advising me of this error. They offered to replace ram but since it was installed and running in my daily computer I was hesitant to be without ram while…

It does exactly what it says on the box; no less, no more (figuratively anyway; the box doesn't even say anything.)Awesome RAM. Runs stable at XMP setting with my 5GHz 8700k without any issue. Remember to bump your Vccio and Vccsa if your board hasn't done so already. I wonder if those guys with Ryzen are having performance regressions due to non-integer FCLK:MCLK ratio or something (I can't tell; I don't have a Ryzen system). I have seen no issue so far on mine on all kinds of stress tests…

I76400T ES, ASrock Z170 EX4 is in use.Initially tested with Oloy 3600 CL18 but not recognized.Since the built-in graphic could not be output, the BIOS was modified to 2400Mhz 16-18-18-43.External graphics can be output up to 2800Mhz 16-18-18-39.More than that, a blue screen appears.It is currently being used as XPEnology.On my other system with AMD Ryzen 5 5600X + MSI B550M PRO-VDH WiFi, XMP works fine.It is recommended to use only as an XMP.Manual Over X

Worth the price maxed out my board and drops price of other ram by 100 bucks not flashy but worth the money Not eco-friendly due to high power consumption!

It performs as described, with XMP my 2x8GB at 3600mhz cl18 performed as it was advertised and I'm satisfied.Excellent RAM when you actually need low profile ram kits as they do not have the heatsink, which can be a huge plus when dealing with clearances in ITX cases such I was having with other low profile ram kits.

I purchased this 3600Mhz dual rank CL18 RAM to pair with my Ryzen 5600X. I like the black PCB with no heatspreader (they don't do anything) and low profile height to fit under my CPU heatsink in my small PC. When the RAM arrived it did not run correctly at 3600Mhz using the XMP profile, they instead ran at a 3200Mhz XMP profile. The Timetec customer service was very prompt and identified an issue with the bath of modules I received. When they received more RAM modules they shipped me a…

What I thought was a ram issue with this ram turned out to be my motherboard (which fried after a week) so I want to take back any negative review I had on here before, aside from the fact that it wouldn't work in my main system after that I think that's more because I had another stick of different brand and speed in there which may have caused that. So I think it may be good ram after all.

Products like this are honestly incredibly underrated, but I'm sure that's part of what keeps the price low, so I'm not really complaining. And by "products like this" I mean DRAM that's almost entirely oriented to function rather than form or "gamer" aesthetics.The truth is that, even for a 3600MHz kit, heat spreaders are entirely superfluous, so I'd rather not pay any extra for them. Likewise, I couldn't care less about RGB support, so it's nice to have an option that completely cuts the…