Wine Bottling Pack Capsules Straight Review

Shrink lids worked great. We're having trouble getting the corks to work properly with the fill tool we have. TBH, this issue could be due to plug, tooling, or user error.

They were perfect for our cruise. For vodka, use a light green white wine bottle. Looks the same as white wine. We dipped the ends of the bottle in boiling water for a few seconds. No need to waste time with a hair dryer.

I've tried using the cork in two ways. I cooked it as instructed and found that the cork was swollen from cooking and too big to fit through the flask. I've tried just popping the cork right out of the bag and it worked, maybe a little force is required, just a little but it worked, no leaks.

This was my first try so I practiced on a bottle of black rum. I used a blow dryer on high with a fan on low, starting at the top and working my way down, rotating slowly. The result looked professional, because that's how it came from the factory! I'm going to try the cooking method now to test it out, but overall I'm very impressed with this product so far!

The corks were too big but luckily I managed to push the original cork in deep enough to trim off the excess and use shrink wrap to keep it looking nice. a bottle of wine, and the stamp definitely helped give it a real look. Too bad the corks were too big for all the bottles I had. Now I just have an excess of big traffic jams. But the seals work well and look great! I recommend boiling the water and then pouring the bottle sideways over the sink.

That worked out great on our cruise. However, this requires some experimentation! The corks were too big, but you can just reuse the cork from the bottle if part of it was uncorked. I brought a pot of water to a boil and lowered the heat to medium or just below. Then, holding the plastic wrap with a pointer, I lowered the bottle and twisted the tip to make sure the plastic cap was submerged in the water. You'll have to experiment with the rotation and how long you have to leave it, but it only…

Just a quick dip in boiling water and it looks perfect. I had to screw up a few before mastering the technique, but that was okay because I had 30 bottles and only had to seal 2 bottles. I would also recommend getting a cork as corks are surprisingly difficult to fit in a bottle. The only caveat is that they would look more authentic if the locket at the top was the same color as the rest of the case. I have a feeling this feature is a dead giveaway when you, I don't know, go on a water…