Wingsmoto Shifter Alloy Folding Unbrakable Review

Es demasiado larga vs. la Version Original. Entendiendo que dicen que es para una Z50 queda demasiado grande para el uso de un niño

Doesn't fit my Can-Am reverse lever, had to fiddle with it. Not 100% perfect but was able to get it working and works fine. Installation was tricky because you had to force it to activate, but once you do it works fine

Mounted on an Apollo 125cc pit bike. Great fit and great quality. I've always loved Wingsmoto products. If I run into any problems in the future I will let you know and update this review. It's important to me that people get quality parts. Many Thanks.

This product does not fit CRF 50 or CRF 70. Its length = 1 which would be ok but it is not flexible enough. When installed, it protrudes further than the footrest. Do yourself a favor and go to the Rocky Mountain ATV, they have one for $19 that is well equipped.

This switch was just as easy to install and fitted well on my son's 2011 Honda CRF80. The shape is a bit different from the original and almost rests on the case, but it works. Unfortunately, the materials used are not suitable for aggressive drivers. It basically took about six hours for the foldable sock to fall off right where it was supposed to fold. The metal seems too soft. Will probably go back to OEM, the more expensive aftermarket.

Great switch to replace the stock switch on my TaoTao TBR7 250CC Dual Sport. The shorter stroke gives you peace of mind that you've landed in the next aisle, and the fact that it's a folder is even better. I only have two complaints: since the bolt screws in from the bottom, it was a bit tricky as my frame made the head of the bolt a bit difficult to access and I had to set it a notch lower than I'm used to too, otherwise the derailleur would hit the bottom of the disc case clutch when…

. Bought for my 2017 Bashan Enforcer 250cc enduro. Was skeptical if it would fit the shaft or be long enough to shift properly. The fit was perfect and shifting was much more positive - day/night difference. It's about a half inch or so shorter than a standard derailleur but fits my 9.5 foot height nicely. Unlike some other derailleurs Chinese bikes use, the set screw is on the bottom so it doesn't get in the way of the crankcase like the others, and has a hex head - coincidentally the same…

I was looking for an upgraded switch for my son's TTR50, it was a great price and looked like a good upgrade. Easy to install and has everything you need to replace the standard lever. It's also a bit longer than my stock lever so there was a bit more leverage to shift, which was good. It must be rotated to level or slightly below so that it does not touch the engine case when shifting. My only issue with this derailleur is that it may not hold up very well off-road. My son rolled over at 0mph…