Wood moisture meter - digital tester MOISTURE METER / Hygrometer, moisture meter, wood techmeter Review

Automatic wood moisture meter - MOISTURE METER. High measurement quality thanks to innovative chips. The main feature of this model of moisture analyzer is the additional function of the hygrometer. This is an important parameter for the woodworking workshop and warehouse: you will be sure that the material will not become damp or deteriorate during storage. There are only three buttons on the front panel, and a list of wood types that can be checked is also presented. A letter is written opposite each type, it must be selected before analysis so that the data is as accurate and reliable as possible. Pocket format allows you to carry the device with you all the time. It is useful, for example, if you want to check the quality of furniture before buying or make sure the logs are dry in the warehouse. there are no problems even during the first operation. It is enough to press the power button, select the type of wood and insert the analyzers into the section of the log or board that you want to check. After that, the liquid crystal monitor will display the percentage of moisture content. Category A: teak, walnut, afrosia, rubber wood, imbois, cocrodua, cork. Category B: keruing, white poplar, beech, cedar, tola. Category C: Lauan, Ash, Elm, Spruce, Maple, Oak, Cherry. Category D: linden, larch, pine, birch. Power supply: krone battery 9 volts Humidity measurement accuracy +/- 0.5%. To measure, it is enough to remove the protective cap and slightly deepen the electrodes into the material. For temperatures ranging from 0 to 40 degrees, automatic temperature compensation is provided. Characteristics: Display: large LCD Measuring principle: electrical resistance Range: tree: 0 ~ 99.9% Resolution: 0.1% Accuracy: ± 0.5% Electrode length: 10mm (0.4") Electrode contacts: Integrated Automatic shutdown: after 10 minutes Body Material: ABS Operating temperature: 0 - 40°C Dimensions: 145x67x32 mm Weight: 200 g.