YOTOO Inflator Flexible Inflator Bicycle Review

This tool makes inflating tires a lot easier. When my neighbor saw how good he was at handling hard-to-reach valve stems, he asked me to help him buy one.

Works well and serves its purpose. My previous cartridge had no caliber and I had to constantly switch between cartridge and caliber. This fixes the problem. I also like the little valve on the side that releases air if an overflow occurs.

Very poor quality, don't waste your time. The body is a cheap cast and leaves air around the trigger pin when blowing. The tires could not be deflated due to a leak at around 74 psi. They need better quality control during production.

Worked great the first time, then picked it up again and the hose got caught and I dropped it, my fault. After that, the sensor didn't read properly, but that can easily be fixed by replacing the sensor. The 90 degree adapter lets some air through when removed from the schrader valve on motorcycles, otherwise it would be 5 stars.

Difficult to control choke from valve stem, especially at 90psi. inches and above when used as a pressure gauge. If I need 120psi, I have to pump to 140psi until my compressor is at max. So if I pull the quick-release chuck after the air hiss, I still have 120psi left. It glows in the dark, especially if you first shine the dial in front of the headlights. I may find or replace a better air cartridge in the future if available.

The arrow is COMPLETELY knocked down. I have to put 60psi in a car tire just to keep it from blowing off the rim. I have no idea how much is actually in the tire, but it's a lot higher than it actually is. I have used a reliable tire pressure gauge to read 35psi but this gauge reads 72psi. I tried to replace the pressure gauge myself, but it is too big and cannot be replaced with a good quality dial indicator. I throw it in the trash and I end up with a completely different brand and style as…