Review on Lightweight And Ergonomic Pneumatic Brad Nailer - NuMax SBR50 - Reload Indicator And 18-Gauge 2" Straight Brad Gun For Trim, Moulding, Baseboard, Doors, And Handrails by Matthew Evans

I got this Brad Nailer, cause I do some work around the house and like to build things every so often. I debated between this and one from HF since I don't use this everyday. (This is a bit nicer and cheaper than the HF one).I was just building a small cabinet and it was perfect for the project. I used some 5/8 and also some 1.5 inch brads. It worked as expected. I did have a few misfires with the 5/8 inch ones. It might be because I did not put the oil in the gun the first time. The 2nd time I put the oil in and was using the 1.5" Brads and has no misfires. Make sure you adjust the air gun to the right PSI so you can control how deep each brad goes in. I used about 75-80 psi and worked perfectly. (Test the PSI on a scrap piece of wood, each brad type and wood type are different)For under $25 this is a steal, just make sure to oil and take care of it.