Dual-Hole Cigarette Lighter Splitter - Waterproof & Dustproof Car Adapter CL01B Review

The wires are made of 16 gauge aluminum, you will probably exceed its rating at 10 amps. This is fine if you just want to connect a phone charger or small electronics, but anything over 100W could be too much. The case itself looks like solid rubber, so it should withstand vibrations much better than plastic.

For the price this is a great deal. The case looks like it's made out of something solid, almost like nylon or glass-reinforced polycarbonate. I assumed the plastic mounting tabs would be too brittle to withstand actual insertion and abuse of insertion, but that doesn't seem to be a problem. The lids are removable if you want, but they also look pretty good. It fits under the car seat to provide extra power for phones and GPS, and thankfully only requires a power supply. That's a good deal!

I needed more than the one 12v socket my car came with. This double socket was the obvious choice! As always, it's easy to connect and fairly solidly built. I can plug and unplug this device and it doesn't seem to flex much - don't worry about breaking it. There is a built-in fuse holder. So if you use a wire connector with an insulating slot or go straight to the battery, the circuit is protected. I wired an "always hot" connection so I don't have to insert the ignition key to use these two…

Building a solar powered greenhouse for my wife. There are 2 USB outputs on the solar controller. She needs at least 4 plus a 12 volt plug for some of the devices she will be using. All we have to do is plug in the power port adapter and we have the sockets we need. It was so easy. This mainly powers two LED bulbs that illuminate the interior at night. It attaches with just two built-in screws and has two wires. One is a ground wire with a spade terminal and the other is a power wire with a lug