🔌 HUIQIAODS 2PCS 9006 HB4 Ceramic Female Socket Adapters Wiring Harness Kit for Headlights and Fog Lamps Review

I have a 2005 MH that used a Lincoln headlight without the special connector in the MH. This connector worked great on a standard mount. It reassured me that the cord to the lightbulb was properly attached. A two-pack is less than half the price at local auto parts stores.

Did the trick - fog lights melted the wiring harness on my '06 Ram 2500 - it was the cure. Solder or crimp shrink fittings, but it depends on your skill level. The crimps may not hold up and cause more resistance and then heat up, melting more wire/lamp terminals.

Ceramic lasts much longer than plastic, always has a higher melting point. Upgraded my fog lights to LED and didn't want to use the factory sockets because they won't handle the voltage and will melt. Ceramic has a high temperature resistance, which is why you see a lot of ceramic electrical connectors.

Perfect replacement for my truck's rusty head. I didn't just buy them because they're ceramic and I need them for heating, I bought them because I wanted to avoid cheap third-party plastic. These work great! Just make sure you seal the joints with grease or plenty of tape to prevent corrosion.

and low beam) and I think they are much better made than cheap plastic bushings. I live in Arizona and the daytime running lights overheat and melt the plastic tubes. So I've replaced them before and less than a year later I'm having the same problem. I expect these ceramic tips will last for many years. Be sure to solder the connections and use heat shrink tubing to keep the connections watertight. The use of electro-lubricant in the connectors blocks moisture ingress and helps prevent…