🔥 Enhance Airflow & Style with PBYMT Mid Frame Air Deflector for Harley Touring Road King Street Electra Glide 2017-2020 (Vivid Black) Review

Installed on the 2020 Road Glide Special. They look great and go with the black on the bike. I used nuts instead of slot nuts. Tech tip: Attach a nut to your finger so you can perform it. On the left side, remove the screws from the cable housing bracket to get your finger on the screw.

Excellent fit and finish and much cheaper than a Harley. The odd shaped nuts supplied are spacer nuts and correct. If you put a washer on one of the bolts and then thread it into the hex nut and tighten the bolt while the nut is in the hole in the frame, it will compress and lock in the hole. Tighten until firmly seated in hole. Then remove the screw and install as with the top screws. Very easy.

midframe deflectors that fit perfectly on my 2017 Road King. They prevent heat from rising under your thighs. All devices came with deflectors and they matched the design. I found it useful to remove the seat prior to installation. You'll have to move the cable clamps, but the new deflectors have tabs to keep the cables away from the engine. It took me about 45 minutes for both sides.

I was a bit skeptical after reading reviews about how difficult the install can be due to the included hardware. Think again, it took me 5 minutes BECAUSE the seller sent the necessary hardware, bolts, washers, nuts, everything needed to assemble in place without using a zipper or side panel EVER to remove. I INSTALLED YESTERDAY IN 5 MINUTES IN MY 2020 Special Street Brief AND IT WAS CHARMING AND LOOKS AMAZING. GREAT WORK seller.

Installation required some effort to remove saddlebags and fairings and move the fuse box to the left side to allow enough room to insert a small magnetic bar with the barrel nut properly positioned. Using a bent pair of needle points, tighten the nut to fully secure the guards. The end result, absolutely beautiful, perfect for a 2021 street brief and has a factory look. All devices also came with shields, so I didn't need anything extra. Very satisfied and can't beat the price or the fast…

I have a 2019 Street Glide Special. I didn't like gusts so I added "fangs" to the front fork which fixed that problem but caused an increased engine overheating problem under my feet (a lot). I live in Florida and often ride in the 95+ heat. These shields have definitely reduced the heat my legs and lower body feel. He's still there to some degree, but MUCH more tolerant because he's leaning away from me now. I checked some tube reviews and videos before installing and had no issues with the…

After figuring out how to install it properly I proceeded. relatively easy, but there were tight spots to tighten the screws. Save time and ignore the other installation "tips" in the reviews. The screw for the plate is screwed directly into the frame. Put the nut in a similarly shaped hole in the bike and you can see where it fits. You don't have to hold the nut, it will hold by itself. Then tighten the screw from below, done. I don't know why people use duct tape to attach a nut to the back…

After all the reviews I buckled up and ordered these things for my 2021 Street Glide. They fit perfectly. I was a little worried about the hardware issues mentioned in previous reviews. I had no problems. The fasteners shown in the pictures do not show the two octa-head screws that came with my kit. When installing, get a flashlight to find out where it is installed. No tie required! Cola was a perfect fit. Well packaged, no scratches or stains upon delivery. I like the looks. All it needs is a

When I stumbled across this on the HD website I thought there was probably a cheaper alternative. I already installed some non-HD components on my rig and they worked so well that I decided to give it a try. Even if I had to replace them every year, it would take me 4 years to get the HD charged. Installation was easy and the covers took about 10 minutes to complete. mounting hole before you cut the insert. This reduces the possibility of the faucet rattling or loosening due to vibration. Your…