🚽 Valterra San Tee Double Rotating Valve: Hassle-Free Waste Management Solution for RV's, Campers, Trailers - 3" x 1.5" Hub Review

We crashed into an alligator on the road and broke the valve system. It was a direct replacement. I was able to screw this bad guy in place of the old broken one. Luckily I didn't have to cut or splice any tubing. Like new.

I bought these to replace an existing caravan part that was removed and they work great! Very easy to install and is the same size as the existing one.

The above image is fitted as standard from the factory. The tether straps kept breaking, so I cut two 90° bends to the right of the trash can. I used this and attached it directly to the bin which made cleaning up a lot easier. The product works great! The valves open and close easily.

Our new target model had **FIVE** external valves. Galley, sink, sewer on one side of hoop, fresh water drain and van washer on the other. I'd have hoses and 'Y's all over the place. Tie the two grays together and run them down a 3-inch drain using this connector. I now have a hose for her and one for the RV washing machine which I can hook up to another drain tap or "Y" at will. country if ever needed.

On my 2005 Dutchman trailer, I noticed a microcrack in the 1-1/2" pipe at the bypass valve right where the pipe is glued to the valve. It was impossible to repair, so I ordered a new valve. Thanks to Valterra for not changing the design. Fits the current one perfectly. I was able to reuse a 3" flange that was glued to a 3" drain pipe from a black water tank. Me used a new piece of 1/2" pipe eight inches long and attached it to the existing pipe with a band seal coupler. The repair didn't take…

I only use the front of this part. I am modifying my RV trailer to separate black and gray water valves to create a single black water outlet dump valve. To do this I had to cut a 1-1/2" gray water valve, attach a full 90 degree elbow and run 1-1/2" ABS tubing to the front 1-1/2" section of this valve . which I installed on my existing 3" valve. Just four screws and a gasket. I now have a convenient black water initial flush followed by a gray water flush on one hose outlet. No more changing…

My 2002 Four Winds RV had a leaking relief valve. I found this valve and it is nothing but gasket kits for both drain valves. Brand and style valve so I pulled the trigger and ordered it. Arrived quickly and was easy to install. I unscrewed the old valve and since the flanges are glued on I unscrewed the glued flanges on the new valve and screwed the new valve assembly to my existing glued flange. closes easily when I've gone to the dump. If these last 16 years are like the original, I'll be…

I would like to thank Valterra for NOT redesigning the 3" wastegate over the years. I was able to fix my 1999 Fleetwood with a leaking and broken bypass gate system without having to replace the entire system. I unscrewed the 3" flap and reused one side of the bracket that was glued to the tank side ABS components. On my new build I greased and mounted and reassembled on a 20 year old bracket. Reusing part of the original assembly saved me a lot of time and money. My sewage system is no longer…

It's three thirty on a lonely highway 30 miles out of town. Suddenly, a tire on my van explodes. I pull to the side and there is nothing left of the tire. Unfortunately, it's also a tire in front of the port dump valve. Nothing remained but fragments of broken pipes. I can't even imagine what liquids are leaking. Fast forward to the next morning. When I get home, I'm pondering how much this mess is going to cost me. The RV dealer gave me a price to replace the relief valve assembly, which was…