๐ช Abrasive & Finishing Products
3 Review
Use on metals, castings, rivets, rust. Use for sharpening, deburring and general purpose grinding. 1/8" shank. Do not run in excess of 30,000 RPM.
3 Review
SIZE: large size brush handle length is 13 cm/ 5.1 inches, the brush head length is approx. 4 cm/ 1.6 inches, and the brush head width is 1 cm/ 0.4 inches. DURABLE MATERIAL: Stainless steel, nylon and brass copper each 5 pieces, strong and durable, can clean rust and detail completely. WIDE APPLICATION: suitable for cleaning steel parts, machinery, theโฆ
Read more about this product
3 Review
โ SIZE: wire wheel brush : 4 in.3 in. 2-1/2 in. 2 in. and 1-1/2 in. Wire Cup Brush: 2 in.2-1/2 in.3 in. Permanently attached 1/4" Hex Shank.6000R.P.M MAX. โ AVOID BREAKS AND DEFORMATIONS: 72A untempered carbon steel wire,The metal wire of the drill brush uses 0.012 Inch carbon steel crimped wire and excellent fixing, the wire will not be lost and bentโฆ
Read more about this product
3 Review
MADE IN THE USA: Weiler Power Cup Bushes are proudly made in the USA at our factory in Cresco, PA. ROBUST CONSTRUCTION: Constructed with an internal steel ring to retain the fill material and ensure equal spacing around the perimeter to minimize vibration and extend life. NON-SPARKING BRASS WIRE FILL: Featuring high-quality brass wire that offers a veryโฆ
Read more about this product
3 Review
These Nylon wire wheel Brush Maintains shape & will not rust,Will not shed bristles under normal conditions. Material: nylon composite grinding sand.So Nylon Bristle Brush safe to use than steel wire brushes, will not puncture skin. Applications: Suitable for wood polishing and deburring.Can also be used for removing paints, corrosion, weld scaleโฆ
Read more about this product
3 Review
Great for cleaning and removing burrs, paint and corrosionof tube/metal tools surface. Constructed with internal two sizes diameter arbor used for various bench grinders. Quality carbon steel wire is resist of corrosion and durable. Precision balanced to eliminate vibration, Max 3,000-RPM. Dimension:6'' face,13/16'' thick,0.012-inch wire Diameter.1/2''โฆ
Read more about this product
3 Review
Size: 210 x 70 x 25 mm. Accessory: Dressing stone (cleaning stone) 65x47x32 mm 1 piece. For Finishing purposes. Grit: 3000. Made in Japan.
3 Review
Pack of 12 steel wool pads. This products adds a great value. This product is manufactured in China. Pack of 12 steel wool pads. Clean grout between tiles. Polish golf clubs. Clean roofs before soldering. Clean copper pipes and joints. Pack of 12 steel wool pads. Clean grout between tiles. Polish golf clubs. Clean roofs before soldering. Clean copperโฆ
Read more about this product
3 Review
๐ใHigh-value Assorted KitใThe tool set contains 8 piece polishing tool, including 3"(75mm)Wire wheel, 2"(50mm) Wire wheel, 0.63"(16mm) Pointed Steel Wire Brush, 1"(25mm) Wire Brush, 2.5"(65mm) Wire Cups Brush, 2"(50mm) Wire Cups Brush, 50*25*6mm and 80*25*6mm 80 grit Abrasive flap wheel. All of them have mounted 1/4" Hex Shank. ๐ใWire Brush Wheel Cupโฆ
Read more about this product
3 Review
Ideal for demanding cleaning applications on somewhat irregular surfaces. Provides heavy duty brushing action with some flexibility. For use on straight grinders and stationary machines such as bench or pedestal grinders and buffing lathes. Steel fill brushes are great for working on carbon steel surfaces. Brush dia 4 in, wire dia .02 in, trim lengthโฆ
Read more about this product
3 Review
MATERIAL: TWIST WIRES ARE MADE OF CARBON STEEL,OTHER PARTS ARE MADE OF ZINC ALLOY AND STEEL. SIZE: DIAMATER IS 1"(25MM),ROUND SHANK DIAMETER IS 1/4",ThICK WIRE DIAMETER IS 0.02"(0.5MM). MAX OPERATION SPEED(RPM) IS 4500 RPM. TWIST KNOT CUP WIRE BRUSH COULD LAST MUCH LONGER TIME THAN NORMAL WIRE KNOT BRUSH. USED TO REMOVE RUST,WELDโฆ
Read more about this product
3 Review
โMATERIAL:Good material for gaps to fill in.High quality and very difficult for them to remove. โWIDE APPLICATION :1)Keep Out Unwanted Guest:Use steel wool to stuff any access points to stop it from entering your home. 2)can be used for polishing stone, glass and marble surface together with soap, water and other objects. 3)maintenance of kitchenwareโฆ
Read more about this product
3 Review
This sandpaper product is crafted using a premium, heat-treated abrasive to create an extra fine grit sandpaper sheet that cuts faster and longer sandpaper life than ordinary sandpaper. Pair this premium sandpaper product with your sanding block, sanding board or use the sandpaper by hand to finish and prepare the surfaces of hard and soft carbon steelsโฆ
Read more about this product
3 Review
Made in Japan. Both 1000 and 6000 grit so one stone can handle most sharpening jobs. Includes a high quality stone holder. Includes an 8000 grit nagura stone for flattening and building a slurry.
3 Review
โ๏ธใDURABLE MATERIALใ: The sand blaster nozzles are made of hard and lightweight boron carbide, which makes the tip of the blast nozzle more durable and lasting, and has a longer serviceable life than ceramics, tungsten carbide and other materials!. โ๏ธใADVANTAGE OF BORON CARBIDEใ: Our boron carbide sandblasting nozzle has many advantages, such as strongโฆ
Read more about this product
3 Review
Size - 6 icnhes, 150mm in diameter, 50ply. Quantity - 2pcs/3pcs/4pcs. Good Workmanship and High Quality - This cotton wheel pads is built for long wear and consistency when smoothing - Fits power drills, die grinders, air grinders, angle grinder, drill press, and most of all other rotary power tools. The edge of the cloth layer is treated with fleeceโฆ
Read more about this product
3 Review
Engine Cylinder Hone. Stones are available in five grits. Clip-on stones and wipers are easily changed in a few seconds. For more information check the main Lisle tool- 15000. Replacement part for Lisle tool- 15000.
3 Review
Medium #800 (Red) / Coarse #320 (Gray). Ceramic soaking stone. Plastic case, Nagura, Combined stone come with.
3 Review
Superfinishing stone (Chou-Shiageto). Size : 8.07ร0.28ร0.075-0.082inch. Grain size : #20000. Surface modification DUAL CLEANER attached.
3 Review
600 FINE GRIT HIGH QUALITY Abrasive Disc Wheel Diameter : 8 inches - Arbor Hole Size: 1/2 inch - Diamond Coating Density : High. PRECISION Lapidary Grinding Glass - Stones - Rocks - Jewelry Making - Metal Tool Sharpening - Grinding Compatible with Worksharp Tool Sharpeners. PROFESSIONAL Quality Electroplated High Density Diamond Coated Flat Lap Lappingโฆ
Read more about this product