πͺ Cutting Tools
3 Review
Each WeldTec auger bit features a hard cutting edge welded to the base material. Auger drill bit features a long-lasting nail-cutting life. Wide flutes and a 7/16-inch quick-change impact shank make this a versatile auger drill bit. 7/8" diameter. 17" overall length.
3 Review
Progressor tooth design cuts faster and lasts longer in wood and metal applications. Reinforced shoulder for added strength and longer life. 8 percent cobalt alloy for longer life and higher heat resistance. Works with standard or Quick Change mandrels (Quick Change requires adapters).
3 Review
γEasy to installγafter drilling a hole with a hole saw put the main part of the grommet directly into the hole and start to hide all cables and wires. γDesk grommetγMade of ABS, with a clip-on cover, convenient to use, excellent comprehensive performance, wear resistance and corrosion resistance, sturdy and durable. γHOLE SAWγThe 2 Inch / 50 mm grommetβ¦
Read more about this product
3 Review
γEasy to installγafter drilling a hole with a hole saw put the main part of the grommet directly into the hole and start to hide all cables and wires. γDesk grommetγMade of ABS, with a clip-on cover, convenient to use, excellent comprehensive performance, wear resistance and corrosion resistance, sturdy and durable. γHOLE SAWγThe 2 inch /50mm grommetβ¦
Read more about this product
3 Review
Whiteside Router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM. Industrial Quality.
3 Review
This product is easy to use. This product is highly durable. This product is manufactured in United States. Save time because you don't need to change drills for different-sized round holes in thin materials. Each drill acts as a pilot for the next size. Made from industrial-grade high-speed molybdenum steel heat treated for maximum durabilityβ¦
Read more about this product
3 Review
Longest lasting cutter bit. Versatile for a variety of metal work. Precision-fit sealed bearings. Easy-adjusting pivot pin.
3 Review
Drill holes in both flat and contoured glass. Diamond-impregnated cutting bit for long life. Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed. Holes on the side of the bit allow the removal of material. Dremel cutting oil not included.
3 Review
Whiteside Router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM. Industrial Quality.
3 Review
Effective on stainless steel, hardened steel, mild steel, copper, brass, wood, fibreglass, hard plastic. Size range 3 - 19mm; max speed 0 - 400rpm. HSS blade 1/4" shank Chamfer angle: 50 degrees (approx). For repairing damaged bolts. Larger sized tool (size range 13 - 35mm) available, please see Laser Part No 7856 Part of a set of 3 internal andβ¦
Read more about this product
3 Review
βΊ[15 Pcs 3mm to 16mm (1/8" to 5/8") Masonry Drill Bits, More Quantity, More Size] Masonry drill bit set with case. Easy to store and take. 3mm 4mm 5mm 6mm 8mm 10mm 12mm 14mm 16mm(1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2" 9/16" 5/8"). There are multiple 9 sizes that will help in drilling by starting with the smallest bit and continuing to the size needed. Toβ¦
Read more about this product
3 Review
Freudβs Top & Bottom Bearing Bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern. Perfect for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops, shelving and other projects. Cuts allβ¦
Read more about this product
3 Review
Suitable for general-purpose machining on steel, chromium-nickel steel, and cast iron. Four flutes produce a better finish than fewer flutes. Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coatingβ¦
Read more about this product
3 Review
Diameter (D): 3/8. Radius (R): 3/32. Cutting height (B): 3/8. Shank (D): 1/4. Overall length (L): 1-13/16.
3 Review
Progressor tooth design cuts faster and lasts longer in wood and metal applications. Reinforced shoulder for added strength and longer life. 8 percent cobalt alloy for longer life and higher heat resistance. Works with standard or Quick Change mandrels (Quick Change requires adapters).
3 Review
A cost effective solution for cutting nail imbedded wood, or wood and metal combination, reinforced concrete and fiberglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten carbide tipped teeth for outstanding cutting performance and product durability. Will cut nailβ¦
Read more about this product
3 Review
Made In the USA. 3/16 Shank Diameter. 5/8 Length of Cut. 2 Overall Length. 4 Flutes.
3 Review
The product is 1-1/2" 38mm Bi hole saw. Easy to use. The product is manufactured in China. Double tooth design strengthens each tooth for longer life and improved durability. Sharper tooth geometry cuts material faster for faster drilling. Thick, hardened backing plates prevent thread stripping. Deep cut style holes saws will cut 2x material in 1 passβ¦
Read more about this product
3 Review
SIZE - 115mm(4-9/16-inch) Drilling Diameter, 10mm(0.4-inch) Shank Diameter. DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp. NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. SPECIAL DESIGN - Slotted edge makes it more sharp, works moreβ¦
Read more about this product