🔧 Fittings
3 Review
Relief pressure adjustable from 0 to 100 psi. 1/4" male NPT threaded inlet connection. Brass construction and stainless steel spring for corrosion resistance. Silicon O-ring provides leak-proof seal to within 10 percent of set pressure. Micrometer-style nylon knob for pressure relief adjustment.
3 Review
Relief pressure preset to 125 psi with flow rate of 116 cfm. 1/4" male NPT threaded inlet connection. Brass construction and stainless steel spring for corrosion resistance. 250 degrees F maximum temperature for use in high temperature applications. ASME safety rated with UV and NB marks.
3 Review
Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water…
Read more about this product
3 Review
Pipe ID - 1'' (25mm). Pipe OD - 1.315'' (33mm). Holesaw size: 1.75'' (44mm). Up to 3/8" Wall Thickness. (9mm). Made in the USA.
3 Review
Can be easily connected to the hose. Temperatures range from -40 to 160 F. Connections: Hose Barb x Hose Barb x Hose Barb. 3/8" Barbed fitting has three openings for connecting your 3/8" ID hoses. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
3 Review
Designed for: Ranges, Stoves, Furnaces or Boilers. Included Adapters - 90-3031-(1) - 5/8 In.OD Flare X 1/2 In. MIP (Tapped 3/8 In. FIP) - 90-3041- (1) - 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP) -EFV-TS -(1)- 5/8 In.OD Flare X 1/2 In. MIP. 106,000 BTU. 100% Factory leak tested. 304 Stainless Steel flexible tubing with plated steel end…
Read more about this product
3 Review
In-line Sight Glass Flow Pipe OD:38MM, Ferrule OD:50.5MM, Fits Tri-clamp:1.5". In-line Sight Glass Max Pressure: 120 PSI,Max Temperature: 300 Fahrenheit. In-line Sight Glass with Clamp End, SUS316 body material. Full bore design,Sight Glass Flow Indicators provides a full 360 to observe fluid flow in any direction. Can be used in vertical or horizontal…
Read more about this product
3 Review
➤Made of stainless steel 304, heavy duty, durable and corrosion resistance. ➤High temperature food-grade silicon seals. ➤NPT 1/2 (National Pipe Taper threads) x 1/2" inner diameter hose. ➤Maximum working pressure:1000 psi. ➤Working Temperature: -100 to +660 degrees °F.
3 Review
Nickel plated brass fitting guards against corrosion. 175 psi maximum working pressure. Double O-ring compression style fitting, tubing can be removed from fitting if needed. Use only with Maxline 3/4-Inch system.
3 Review
MATERIAL - 300 Series Stainless Steel. SIZE - 2pcs 2" T Bolt hose clamps. RANGE - 2.20" - 2.52" same as 56-64mm for 2" Hose Inside Diameter. APPLICATION - T-bolt clamps provide leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment. ATTENTION - Used for 2" ID hose, better to check your Hose OD to fit the…
Read more about this product
3 Review
What you get: you will receive 1 set of UHS24 universal humidifier solenoid valve, each set contains 5 pieces of brass fittings, such as compression, plastic tube insert and sleeve, enough for using and replacing. Scope of application: our universal 24 volt solenoid valve can be applied for replacing Aprilaire 4040, General 990-53, Honeywell…
Read more about this product
3 Review
High Quality Key Type Hose Clamp, Easy to use, don’t require any tools to tighten or loosen. Metal: Plastic + Metal. Package Quantity: 40pcs (5 sizes, each size 8pcs). Fit Hose Diameter: 8-12mm, 10-16mm, 13-19mm, 16-25mm, 19-29mm. Organized Within A Convenient Plastic Storage Case, Plastic Case Can Be Reused.
3 Review
No tools required,Push fit fittings. Easy to use,Mini quick connect push tee 3/8-Inch OD. Push fit fittings,Quick Connect Fitting 3/8" RO Water System. Standard fitting for water filter systems using 6mm water filter tubing.
3 Review
SIZE - 1/2 NPT male thread to 3/8 NPT female thread hex bushing. PLEASE NOTE, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter. Please look the size chart for the specific thread diameter. NPT thread has a 60° taper, so usually unable to screw the thread to the end. MATERIAL - Premium forged brass reducer, thicker and…
Read more about this product
3 Review
SIZE - 1/4 NPT to 1/4 NPT male brass equal hex nipples. PLEASE NOTE, NPT Taper Thread Size is a nominal pipe size and it does not represent the actual diameter. Please look the size chart for the specific thread diameter. NPT thread has a 60° taper, so usually unable to screw the thread to the end. MATERIAL - Premium solid brass nipple, thicker and…
Read more about this product
3 Review
Package includes: 2 packs tank float valves, spend less time filling and checking the water tank to protect the plants from drying. No power or pump required: the water float ball valve is suitable for low pressure gravity feeding systems, leak-free operation is achieved by hand tightening. Material: the mini float valve is durable with adjustable arms…
Read more about this product
3 Review
Adapter for connecting pipes or fittings of different types. Hub opening on one end and female National Pipe Taper (NPT) threads on the other for connecting two pipes with different ends. PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal. Smooth interior finish for reduced friction and material buildup. Meets…
Read more about this product
3 Review
Dual Vacuum Breaker Repair Kit. Model Number: 108-138. Item Product Dimension: 9.0" L x 5.0" W x 4.0" H. Item Package Weight: 6.0 lb.
3 Review
DC 12V 1/4" Quick connect Solenoid valve. Turn on water when system start;and cut off water when system stop. Working pressure:0.02-0.8Mpa. Its working temperature:32-158°F (0-70°C). Rated power:4.8W. It will become hot because there are so many coils inside. It’s normal and safe phenomenon. The highest working temperature of this product reaches 60°C…
Read more about this product
3 Review
90-degree elbow for connecting two pipes or fittings at an angle. Hub ends for connecting to male unthreaded pipes or fittings. PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal. Smooth interior finish for reduced friction and material buildup. Meets specifications ASTM D2665 and D3311 for quality assurance.